Schneider Electric BMH1002T11F2A
MPNBMH1002T11F2A
Active
Square D BMH1002T11F2A Servo Motor|Square D BMH1002T11F2A Servo Motor
$1,868.00 – $1,960.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Feedback type | Single turn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 240 V |
| Maximum current irms | 30 A LXM32.D30M2 115 V 30 A LXM32.D30M2 230 V |
| Output current 3s peak | 30.0 A |
| Continuous stall current | 8.65 A |
| Maximum permanent current | 30.24 A |
| Continuous power | 2.39 W |
| Brake pull-in power | 12 W |
| Nominal output power | 750 W LXM32.D30M2 10 A, 115 V, single phase 1450 W LXM32.D30M2 10 A, 230 V, single phase |
| Number of motor poles | 5.0 |
All specifications
| Parameter | Value |
|---|---|
| Phases | Three phase |
| Network number of phases | 3 |
| IP degree of protection | IP54 standard |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.4 in (9 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 4.5 in (115 mm) |
| Electrical connection | Rotatable right-angled connectors |
| Key width | 1.2 in (30 mm) |
| Centring collar depth | 0.1 in (3.5 mm) |
| Length | 8.0 in (202.3 mm) |
| Inertia | 0.49 kg.cm² of brake 6.279 kg.cm² of motor |
| Category | US1PC5318282 |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft length | 1.6 in (40 mm) |
| Holding brake | With |
| Nominal speed | 2000 rpm LXM32.D30M2 10 A, 115 V, single phase 3000 rpm LXM32.D30M2 10 A, 230 V, single phase |
| Rotor inertia | 6.77 kg.cm² |
| Holding torque | 48.7 lbf.in (5.5 N.m) holding brake |
| Nominal torque | 31.0 lbf.in (3.5 N.m) LXM32.D30M2 10 A, 115 V, single phase 40.7 lbf.in (4.6 N.m) LXM32.D30M2 10 A, 230 V, single phase |
| Shaft diameter | 0.7 in (19 mm) |
| Torque constant | 0.71 N.m/A 248 °F (120 °C) |
| Sizing reference | BMH1002T |
| Back emf constant | 46.2 V/krpm 248 °F (120 °C) |
| Device short name | BMH |
| Motor flange size | 3.9 in (100 mm) |
| Peak stall torque | 91.2 lbf.in (10.3 N.m) LXM32.D30M2 10 A, 115 V, single phase 162.9 lbf.in (18.4 N.m) LXM32.D30M2 10 A, 230 V, single phase |
| Stator inductance | 1.42 mH 68 °F (20 °C) |
| Stator resistance | 0.54 Ohm 68 °F (20 °C) |
| Temperature magnet rt | 68 °F (20 °C) |
| Maximum axial force fa | 0.2 x Fr |
| Number of motor stacks | 2 |
| Temperature copper hot | 275 °F (135 °C) |
| Temperature magnet hot | 212 °F (100 °C) |
| Continuous stall torque | 53.1 lbf.in (6 N.m) LXM32.D30M2 10 A, 115 V, single phase 53.1 lbf.in (6 N.m) LXM32.D30M2 10 A, 230 V, single phase |
| Maximum radial force fr | 990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm |
| Accuracy error [angular] | 1.4 ° |
| Centring collar diameter | 3.7 in (95 mm) |
| Maximum mechanical speed | 6000 rpm |
| Speed feedback resolution | 131072 points/turn |
| Stator electrical time constant | 5 ms 68 °F (20 °C) |
MPN
BMH1002T11F2A