Schneider Electric BMH1002T11F1A
MPNBMH1002T11F1A
Active
servo motor BMH, Lexium 32, 6Nm, 6000rpm, keyed shaft, with brake, IP54, 128bit encoder, straight
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | With |
| Parameter | Value |
|---|---|
| Nominal torque | 31.0 lbf.in (3.5 N.m) LXM32.D30M2 10 A, 115 V, single phase 40.7 lbf.in (4.6 N.m) LXM32.D30M2 10 A, 230 V, single phase |
| Nominal output power | 750 W LXM32.D30M2 10 A, 115 V, single phase 1450 W LXM32.D30M2 10 A, 230 V, single phase |
| Continuous power | 2.39 W |
| Nominal speed | 2000 rpm LXM32.D30M2 10 A, 115 V, single phase 3000 rpm LXM32.D30M2 10 A, 230 V, single phase |
| Maximum mechanical speed | 6000 rpm |
| Continuous stall torque | 53.1 lbf.in (6 N.m) LXM32.D30M2 10 A, 115 V, single phase 53.1 lbf.in (6 N.m) LXM32.D30M2 10 A, 230 V, single phase |
| Peak stall torque | 91.2 lbf.in (10.3 N.m) LXM32.D30M2 10 A, 115 V, single phase 162.9 lbf.in (18.4 N.m) LXM32.D30M2 10 A, 230 V, single phase |
| Holding brake torque | 48.7 lbf.in (5.5 N.m) holding brake |
| Rotor inertia | 6.77 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 240 V |
| Network phases | 3 |
| Phase | Three phase |
| Maximum current (Irms) | 30 A LXM32.D30M2 115 V 30 A LXM32.D30M2 230 V |
| Continuous stall current | 8.65 A |
| Maximum permanent current | 30.24 A |
| Torque constant | 0.71 N.m/A 248 °F (120 °C) |
| Back-EMF constant | 46.2 V/krpm 248 °F (120 °C) |
| Number of motor poles | 5.0 |
| Stator resistance | 0.54 Ohm 68 °F (20 °C) |
| Stator inductance | 1.42 mH 68 °F (20 °C) |
| Stator electrical time constant | 5 ms 68 °F (20 °C) |
| Electrical connection | Straight connectors |
| Parameter | Value |
|---|---|
| Feedback type | Single turn SinCos Hiperface |
| Speed feedback resolution | 131072 points/turn |
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 0.7 in (19 mm) |
| Shaft length | 1.6 in (40 mm) |
| Second shaft end | Without second shaft end |
| Key width | 1.2 in (30 mm) |
| Motor flange size | 3.9 in (100 mm) |
| Mounting support | International standard flange |
| Length | 8.0 in (202.3 mm) |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 0.4 in (9 mm) |
| Mounting-hole bolt circle diameter | 4.5 in (115 mm) |
| Centring collar diameter | 3.7 in (95 mm) |
| Centring collar depth | 0.1 in (3.5 mm) |
| Maximum radial force (Fr) | 990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm |
| Maximum axial force (Fa) | 0.2 x Fr |
| Parameter | Value |
|---|---|
| IP degree of protection | IP54 standard |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 275 °F (135 °C) |
MPN
BMH1002T11F1A