Skip to main content
Log in
Schneider Electric ILA1F571PB1F0

Schneider ILA1F571PB1F0 Lexium integrated drive, 36 V, 0.26 N.m

MPNILA1F571PB1F0
Obsolete

Schneider ILA1F571PB1F0 — now discontinued, supplied from remaining surplus and broker stock.

$3,040.00Ref. price · indicative, final on quote
Schneider Electric ILA1F571PB1F0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILA1F571PB1F0 key specifications
ParameterValue
Motor typeAC Synchronous Servo Motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeSingle turn encoder
Gear box typeWithout
Protection typeOverload of output voltage Short circuit of the output voltage Safe torque off
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...40 V
Discrete output voltage23...25 V

All specifications

ILA1F571PB1F0 additional specifications
ParameterValue
Supply voltage36 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous 7000 mA peak
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Brake pull-in power10 W
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Communication interfaceCANopen DS301, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.06 in (1.6 mm)
StandardsEN 61800-3 : 2001-02 IEC 60072-1 EN 50347 EN/IEC 50178 IEC 61800-3, Ed 2 EN/IEC 61800-3 EN 61800-3:2001, second environment
Length7.5 in (190.8 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (20 mm)
Holding brakeWith
Nominal speed3200 rpm 24 V 5500 rpm 36 V
Rotor inertia0.17 kg.cm²
Accuracy error+/- 0.05 °
Holding torque10.6 lbf.in (1.2 N.m) holding brake
Nominal torque2.30 lbf.in (0.26 N.m)
Shaft diameter0.4 in (9 mm)
Device short nameILA
Motor flange size2.2 in (57 mm)
Peak stall torque5.3 lbf.in (0.6 N.m)
Transmission rate50, 100, 125, 250, 500, 800 and 1000 kbauds
Brake release time14 ms
Service life in hours20000 h bearing
Associated fuse rating10 A
Brake application time13 ms
Maximum axial force fa104 N force pressure) 104 N tensile force)
Number of motor stacks1
Continuous stall torque2.30 lbf.in (0.26 N.m)
Maximum radial force fr89 N
Centring collar diameter2.0 in (50 mm)
Speed feedback resolution16384 points/turn x 4096 turns
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILA1F571PB1F0 is a Schneider Lexium integrated drive combining an AC synchronous servo motor and drive electronics in one unit, rated 0.26 N.m torque on a 36 V supply, with CANopen DS301 fieldbus onboard. It carries a 6-pole winding, single-turn encoder feedback, and a holding brake, sealed to IP54 total with IP41 at the shaft bushing per EN/IEC 60034-5.

Compared to the BRS368H131ACA, the ILA1F571PB1F0 delivers 0.26 N.m torque versus 1.5 N.m, and runs on 36 V versus 34 V, with a 16384-point/turn encoder resolution versus 10000 points/turn — the ILA1F571PB1F0 suits lower-torque, higher-resolution positioning; the BRS368H131ACA handles heavier loads at 3000 rpm.

MPN
ILA1F571PB1F0