Schneider Electric ILA2K572TB1F0
MPNILA2K572TB1F0
Obsolete
Square D ILA2K572TB1F0 Integrated Drive/Motor|Square D ILA2K572TB1F0 Integrated Drive/Motor
$2,303.78 – $3,455.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Motor type | AC synchronous servo motor |
| Network type | DC |
| Winding type | High speed of rotation and medium torque |
| Feedback type | Single turn encoder |
| Gear box type | Without |
| Protection type | Safe torque off Overload of output voltage Short circuit of the output voltage |
| Type of cooling | Natural convection |
| Range of product | Lexium integrated drive |
| Input (output type) | 4 signals (each be used as input or output) |
| Product or component type | Motion integrated drive |
| Supply voltage limits | 18...55.2 V |
| Discrete output voltage | 23...25 V |
All specifications
| Parameter | Value |
|---|---|
| Supply voltage | 24 V 48 V |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Current consumption | 7500 mA maximum continuous 9000 mA peak |
| Discrete input current | 10 mA at 24 V for safety input 2 mA at 24 V for 24 V signal interface |
| Maximum switching current | 100 mA per output 200 mA total |
| Brake pull-in power | 10 W |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| IP degree of protection | IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5 |
| Commissioning interface | RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds) |
| Communication interface | Ethernet/IP, integrated |
| Mounting support | Flange |
| Mounting holes diameter | 5.2 mm |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 66.6 mm |
| Electrical connection | Printed circuit board connector |
| Shock resistance | 150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29 |
| Relative humidity | 15...85 % without condensation |
| Operating altitude | <= 1000 m without derating |
| Vibration resistance | 20 m/s² (f= 10...500 Hz) 10 cycles conforming to EN/IEC 60068-2-6 |
| Centring collar depth | 1.6 mm |
| Standards | IEC 60072-1 EN 61800-3 : 2001-02 EN 50347 EN/IEC 61800-3 EN 61800-3:2001, second environment IEC 61800-3, Ed 2 EN/IEC 50178 |
| Length | 209.3 mm |
| Marking | CE |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft length | 20 mm |
| Holding brake | With |
| Nominal speed | 3000 rpm at 24 V 5100 rpm at 48 V |
| Rotor inertia | 0.243 kg.cm² |
| Accuracy error | +/- 0.05 ° |
| Holding torque | 1.2 N.m holding brake |
| Nominal torque | 0.57 N.m |
| Shaft diameter | 9 mm |
| Device short name | ILA |
| Motor flange size | 57 mm |
| Peak stall torque | 0.85 N.m |
| Transmission rate | 125, 250, 500 kbauds |
| Brake release time | 14 ms |
| Service life in hours | 20000 h bearing |
| Associated fuse rating | 16 A |
| Brake application time | 13 ms |
| Maximum axial force fa | 104 N (force pressure) 104 N (tensile force) |
| Number of motor stacks | 2 |
| Continuous stall torque | 0.57 N.m |
| Maximum radial force fr | 107 N |
| Centring collar diameter | 50 mm |
| Speed feedback resolution | 16384 points/turn |
| Ambient air temperature for storage | -25...70 °C |
| Ambient air temperature for operation | 40...55 °C (with power derating of 2 % per °C) 0...40 °C (without derating) |
| Permissible ambient air temperature around the device | 105 °C power amplifier 110 °C motor |
MPN
ILA2K572TB1F0