Schneider ILE2K661S2172 — now discontinued, supplied from remaining surplus and broker stock.
| Parameter | Value |
|---|---|
| Motor type | Brushless DC motor |
| Network type | DC |
| Winding type | Medium speed of rotation and medium torque |
| Feedback type | BLDC encoder |
| Protection type | Overload of output voltage Short circuit of the output voltage Safe torque off |
| Type of cooling | Natural convection |
| Range of product | Lexium integrated drive |
| Input (output type) | 4 signals (each be used as input or output) |
| Product or component type | Motion integrated drive |
| Supply voltage limits | 18...55.2 V |
| Discrete output voltage | 23...25 V |
| Supply voltage | 24 V 48 V |
| Parameter | Value |
|---|---|
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Current consumption | 7000 mA peak 5500 mA maximum continuous |
| Discrete input current | 10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface |
| Number of motor poles | 6 |
| Phases | Single phase |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Mounting support | Flange |
| Shock resistance | 150 m/s² 1000 shocks IEC 60068-2-29 |
| Operating altitude | <= 3280.84 ft (1000 m) without derating |
| Vibration resistance | 20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6 |
| Standards | IEC 50178 EN 61800-3:2001, second environment IEC 60072-1 IEC 61800-3, Ed 2 IEC 61800-3 EN 61800-3 : 2001-02 IEC 50347 |
| Marking | CE |
| Category | US1PC5618288 |
| Second shaft | Without second shaft end |
| Device short name | ILE |
| Motor flange size | 2.6 in (66 mm) |
| Transmission rate | 125, 250, 500 kbauds |
| Associated fuse rating | 16 A |
| Ambient air temperature for storage | -13...158 °F (-25...70 °C) |
| Ambient air temperature for operation | 104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating) |
| Permissible ambient air temperature around the device | 221 °F (105 °C) power amplifier 230 °F (110 °C) motor |
The ILE2K661S2172 is a Schneider Lexium integrated drive combining a brushless DC motor and drive electronics in a single 66 mm frame, rated for 7.0 A switching current at 128 rpm on a 24 V DC single-phase supply. It carries 6 poles, mounts via flange, and is sealed to IP41 at the shaft bushing and IP54 total, with TÜV, UL, and cUL certifications covering IEC 61800-3 and IEC 60034-5.
The ILE2K661S2172 has a switching current of 7.0 A, higher than the BRS368H131ACA.
No related articles