Skip to main content
Log in
Schneider Electric LC2K12107M72 — Contactors

Schneider TeSys K LC2K12107M72 Reversing Contactor, 3P, 12A

MPNLC2K12107M72
Active

Schneider Electric TeSys K reversing contactor, 3 poles, AC-3 rated 12 A at ≤440 V, 1 NO auxiliary, 220…230 V AC coil, preassembled with reversing power busbar.

Schneider Electric LC2K12107M72 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LC2K12107M72 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationResistive load Motor control
LC2K12107M72 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-1 AC-3 AC-4
LC2K12107M72 — Contacts & Poles
ParameterValue
Pole configuration3P
LC2K12107M72 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC2K12107M72 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The AC-3 rating of 12 A at ≤440 V governs motor switching; for resistive loads (AC-1) the thermal capacity is higher.

The contactor carries a single normally-open auxiliary contact (1 NO) for status feedback or interlocking. The 690 V AC rated operational voltage on the power circuit means the main poles can switch motor loads on a 400 V or 480 V line without derating the insulation.

The V-0 flammability rating (UL 94) and NF F 16-101 compliance cover rail and industrial fire-safety requirements.

Frequently asked questions

Does this contactor include the mechanical interlock and busbar?

Yes — it is preassembled with the reversing power busbar, so the mechanical interlock between the forward and reverse contactors is built in. No separate interlock kit or busbar to order.

What approvals and compliance documentation are available?

The contactor carries V-0 flame retardance per UL 94, NF F 16-101/102 for rail fire safety, and IEC 60068 shock/vibration ratings. The IP20 protection is per VDE 0106. RoHS and REACH compliance documentation is available from Schneider.

MPN
LC2K12107M72