What this order code resolves to
The order code is ACH580-VCR-044A-4+F267 from ABB, listed under the ACH580 HVAC drive family with the VCR package and a +F267 option suffix on the base code.
Reading the rating without the brochure
The weight figure on the listing reads as 0.00 kgs — for an ACH580-class frame that is not a real shipping or panel-handling number, so treat the listed mass as a data gap and confirm the chassis weight against the official datasheet before you spec the panel cutout or lifting kit.
Same-family sibling: ACH580-VCR-027A-4
Cross-shopping 027A against 044A is a motor-horsepower decision, not a topology or firmware decision — the keypad footprint, I/O map, and fieldbus option cards stay common across the ACH580-VCR series, so a panel designed around the 027A does not need a different cutout to accept a 044A, but the input breaker, line reactor sizing, and short-circuit headroom must be re-checked for the larger ampere frame.
Cross-platform and cross-package peers
ACH580-PDR-027A-4+B056 is the wall-mount/IP21 package version of the same ACH580 platform; same drive electronics in a different enclosure, so it is a layout reference rather than a panel drop-in. ACS320-03U-10A8-2 is a different ABB drive platform — a general-purpose ACS320 frame, not an ACH580, so it is not a same-architecture swap for the ACH580-VCR-044A-4+F267.
Sourcing posture
For a 044 A frame on the HVAC drive line, the practical posture is to quote to order against an RFQ: confirm the +F267 option still maps to the same firmware/option bundle the original panel was designed around, then specify the BOM line with that exact order code so the factory order string is unambiguous.