What the order code buys
The ABB ACS380-040C-07A2-4+K475 is an ACS380-series motor drive carrying the +K475 factory-configured option suffix, listed under ABB's Drives line at 1.81 kgs. The 040C frame and 07A2 current rating are baked into the order code itself, so a buyer cross-referencing a BOM line against this code is reading the configured variant — not a base catalog number — and the option suffix is what determines firmware, keypad, or I/O fit at commissioning.
Sizing and application fit
The ACS380-frame drive is catalogued under the Drives line with sub-category Motor Drives and top category Motors & Motor Controls. The +K475 suffix indicates a configured option package rather than the base drive; option suffixes must be matched against the as-built I/O and fieldbus requirement before commissioning.
Integration checklist
The drive mounts in the same ACS380 footprint family at 1.81 kgs, so the panel cut-out and DIN / wall pattern follow the series standard rather than this specific code. Match the +K475 option list against the as-built I/O and fieldbus requirement at the FAT — option suffixes are exactly where the wrong drive shows up as a commissioning surprise. Fieldbus, safety, and braking-resistor cards slot into the standard ACS380 bays, but the populated option set is what determines whether those slots are free or occupied on this specific unit.