What the order code points to
The ABB ACS800-01-0006-3+E202-0J400-L503-P904-R700 is a wall-mount AC drive from the ACS800-01 family, sold on the Motors & Motor Controls / Drives / Motor Drives line and identified by the full plus-code string with options +E202, +L503, +P904 and +R700 already encoded into the part number itself, so a control cabinet built around this code cannot be re-served by a bare ACS800-01-0006-3 — the option suffixes carry the application-specific configuration.
Rating that drives the panel decision
Shipping mass sits at 3.66 kgs, which puts it on the borderline where a single installer can shoulder it onto a backplate but the panel builder should still verify the cabinet load — mill cabinets near the coiler or furnace run warm, and a drive at this mass on a rear-mounted plate concentrates heat into the same chassis that the contactors share.
Why the ACS880-01 is not a drop-in for this slot
A buyer with an existing panel specced around the ACS880-01-11A0-5 will find that the ACS800-01-0006-3+E202-0J400-L503-P904-R700 is a different platform, not a same-frame alternate — the ACS880-01-11A0-5 weighs 4.54 kgs against the ACS800 at 3.66 kgs, footprint and keypad differ between the two generations, and fieldbus / safety option card mapping does not carry across, so the panel built for ACS880 cannot accept this drive without rewiring and parameter re-mapping. The adjacent ACS580-01-031A-2 and ACS880-01-07A6-5 are likewise stand-alone peers on the same Motor Drives line, not cross-references: 2.99 kgs and 6.35 kgs respectively, and each carries its own current frame and option map, so any BOM swap needs a fresh derate check rather than a code substitution.
Sourcing posture for this code
ABB is the listed manufacturer on this order code, and the configured option string — +E202, +L503, +P904, +R700 — is the part a panel builder needs to keep whole when ordering a replacement; splitting the code and re-adding options later in the field is not a clean path, so the BOM line is quoted to order against an RFQ with the full code on it rather than as a generic ACS800-01-0006-3.