What it is and how it lands on the BOM
The ABB ACS800-01-0009-5+E200+0J400+P904+R700 is an AC drive in the Motor Drives line, sold as a wall-mount ACS800-01 family unit with the +E200, +0J400, +P904 and +R700 option suffixes applied. The full string is the order code a buyer pastes into the BOM line — every suffix changes the as-shipped content, so a mis-paste on a single character ships the wrong firmware option set. Mass comes in at 9.12 kgs, which puts the unit in the single-person lift bracket for a panel builder hanging it on a vertical surface — no spreader bar, no second person required if the wall anchor is rated for it.
Where the suffix string earns its place on the line
ACS800-01 frames are the wall-mount branch of the ACS800 family, generally sized for smaller kW loads where the cabinet builder wants the drive outside the main enclosure on its own backplate. The 9.12 kgs figure is consistent with the smaller end of that frame range rather than the larger book-form units. The +E200 / +0J400 / +P904 / +R700 suffix chain is what differentiates one configured drive from another on the same frame — the integrator needs the same full string to land on a like-for-like replacement, not just the base 0009-5 code.
Sourcing posture
The ACS800-01 platform has been superseded by the ACS880-01 in ABB's catalog, which is what brings integrators and MRO planners here looking for a configured unit that is no longer the factory's first recommendation. That puts this order code in the specified-into-the-BOM category — quoted to order against an RFQ, not pulled off a live factory shelf on a generic stocking line.