Reading the order code
The ABB ACS800-01-0040-3+D150+E202+P901 is a wall-mount AC drive in the ACS800-01 family, identified on the nameplate by the full string including the +D150, +E202 and +P901 option suffixes — those suffixes are what distinguish this build from a base ACS800-01-0040-3 and they have to match the BOM line exactly when the unit is being replaced like-for-like on a running panel. The catalog places it under Motors & Motor Controls › Drives › Motor Drives, which lines up with the ACS800-01 frame being sized for direct-to-motor cabinet mounting rather than bulk-drive cabinet integration.
Handling and cabinet fit
Listed weight is 3.63 kgs for the drive module, which keeps it inside single-person lift range and a standard two-bolt panel mount — no spreader bar needed at install. For a hot-strip mill retrofit where ambient heat off the rolls and the EMI from the megawatt drives on the same bus are the real constraints, the question is whether the option set on this build (+D150 / +E202 / +P901) carries the environmental and EMC provisions the cabinet design assumed — confirm those suffix codes against the original panel drawings before pulling the line.