What lands on the dock
The ABB ACS800-01-0060-3+E200+K454 is an AC drive from the ACS800-01 wall-mount family, with +E200 and +K454 appended as factory option codes that the buyer has to match verbatim on a replacement order. The drive sits in the Motor Drives class under Motors & Motor Controls, alongside the rest of the ABB low-voltage drive portfolio. Mass is 31.75 kg, which is heavy enough that the cabinet has to be specified for that weight and two technicians are needed to seat the unit on a hot day near the mill stands.
Cross-shop candidates the buyer will ask about
Three ABB drives sit in the same category as possible alternatives an OEM purchasing agent will surface: ACS880-01-065A-5 at 23.13 kg, ACH550-VDR-059A-4 at 31.75 kg, and ACS580-01-078A-4 at 28.58 kg. None of those three is an official L-coded successor of the ACS800-01-0060-3+E200+K454 and none of them carries the +E200 and +K454 option string, so treating any of them as a drop-in for an existing ACS800-01 panel is a swap that needs a full engineering review, not a BOM-line edit.
Handling and panel notes for the mill floor
At 31.75 kg the unit is past the one-person-lift threshold, so the panel layout needs to leave clearance for a two-person set and for through-door or split-cabinet mounting rather than blind rear-mounting against the cabinet wall. On a rolling-mill deck the cabinet that holds this drive should be sited away from direct radiant heat off the stands and given the EMC separation an ACS800-01 needs from the larger megawatt drives on the same floor, since the cabinet’s own mass is no defence against conducted noise from neighbouring cells.
Close
Spec the line on the full string — base code plus +E200 and +K454 — and quote it to order against an RFQ; that is what closes the BOM row for this drive whether the panel is a new build or a hot-spare for a line that cannot wait.