What it is
The ABB ACS800-04-0009-3+E200-J400 is a low-voltage AC drive on the ACS800-04 wall-mount frame, ordered with the +E200 and +J400 option codes, listed under ABB on the Motor Drives line.
Why the suffix codes matter at RFQ time
The order string is not just ACS800-04-0009-3 — the +E200 and +J400 codes define the factory build, and a partial match on the base code with the suffixes dropped will not drop into a panel that was specified around the full string.
Sizing context against the ACS880 successor family
The ACS880-01-021A-5 lists at 7.71 kg against the ACS800-04-0009-3+E200-J400 at 7.94 kg — close enough that the cabinet mounting footprint and lifting plan built around the ACS800 are not invalidated by the swap, though mechanical and control-side differences between the ACS800 and ACS880 generations mean the ACS880-01-021A-5 is not a direct pin-for-pin substitute and panel wiring must be re-validated against the ACS880 wiring diagram before commissioning.
Sourcing posture
The seed is sourced against an RFQ; for the ACS800-04 frame and its option-coded builds the prudent move is to quote the exact order string +E200 and +J400 rather than a base-code-only substitution, and to confirm compatibility in writing before any panel retrofit against an ACS880-01 replacement candidate.