What shows up on the dock
The ABB ACS850-04-202A-5+E202+J400+K458 is an industrial AC drive in the Motor Drives class — frame-04 cabinet-mount construction with the as-shipped variant locked by the three trailing option codes (+E202, +J400, +K458) that pick the fieldbus interface, the safety/control macro and the application firmware loaded at the factory. Listed mass is 66.68 kgs, which puts it in hoist-or-pallet-jack handling territory; the cabinet base or the panel floor has to be rated for that load before the drive is set in place, and the lifting eyes on the frame are the only sanctioned lift points.
Option-code suffix is part of the BOM line
The full string ACS850-04-202A-5+E202+J400+K458 is the order code — bare ACS850-04-202A-5 is not the same ship. +E202, +J400 and +K458 each select a different firmware/option block, so a procurement line that drops the suffix ships a different drive even though the frame and current rating match. For panel builders, that means the wiring diagram and the fieldbus node map must be drawn against the configured MPN, not the base frame: the option codes decide which terminals carry the safety enable, which protocol the drive speaks on its comms port, and which parameter set is loaded at first power-up.
Sourcing posture
Production-status of the configured string is not stated in the line record. Treat the build as specified-into-the-BOM and quote it to order against the full +E202 +J400 +K458 suffix rather than substituting a frame-only code at RFQ time.