The E2EQ-X2C312-M1 is a shielded M12 inductive proximity sensor from the E2EQ NEXT series, built with a fluororesin coating that resists welding slag and spatter buildup — keeps the face clean where standard sensors false-trigger from debris. Outputs NPN (NO+NC) on a 3-wire DC supply between 10 and 30 V. Sensing distance is 2 mm, flush-mount rated, so it can sit in a drilled pocket without derating. IP67 seals against coolant and washdown. Connection is via an M12 4-pin male connector — no pigtail to replace. The short brass body (48 mm overall) fits standard 12 mm mounting holes. Threaded length is 29 mm.
Omron E2EQ-X2C312-M1 Proximity Sensor, NPN, 2mm, IP67
Omron E2EQ-X2C312-M1, Shielded M12 inductive proximity sensor, NPN NO+NC, 2 mm sensing range, 10–30 VDC, fluororesin coating, IP67.
Specifications
Sensing
| Parameter | Value |
|---|---|
| Sensing distance | 2 mm |
Electrical
| Parameter | Value |
|---|---|
| Supply voltage | 10 to 30 VDC |
| Connection / connector | M12 4-pin connector |
Mechanical
| Parameter | Value |
|---|---|
| Size | M12 |
Other specifications
| Parameter | Value |
|---|---|
| IP67 | IP67 |
| Output | NPN |
| Coating | Fluororesin Coating |
| Shielded | Shielded |
| Operation | NO+NC |
| Supply type | 3-wire DC |
| Case material | Brass |
| Sensing distance | 1x |
| Long (Short body) | Short |
| Overall length | 48 |
| Threaded length | 29 |
| Sensing surface material | Fluororesin |
Product details
Frequently asked questions
What IP rating does the E2EQ-X2C312-M1 carry?
It is listed as IP67, meaning dust-tight and protected against temporary immersion — sufficient for washdown and wet-floor conditions.
What is the sensing distance and mounting style?
The shielded design gives a 2 mm sensing range and allows flush mounting in metal without sacrificing detection distance.
