Skip to main content
Log in
Omron E3Z-FTP22 — Photoelectric Sensors

Omron E3Z-FTP22 Through-beam Sensor, PNP, 20 m

MPNE3Z-FTP22

Omron E3Z-FTP22, through-beam photoelectric sensor, PNP output, 20 m range, M12 4-pin, rectangular compact plastic body.

Omron E3Z-FTP22 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E3Z-FTP22 — Sensing
ParameterValue
Sensing methodThrough-beam
Light sourceInfrared LED
E3Z-FTP22 — Electrical
ParameterValue
Supply voltage10 to 30 VDC
E3Z-FTP22 — Connection
ParameterValue
ConnectionM12 4-pin connector
E3Z-FTP22 — Other specifications
ParameterValue
OutputPNP
Body typeRectangular - Compact
OperationL-ON/D-ON selectable
Housing materialPlastic
Product life cycleActive
Max sensing distance20 m

Product details

Integrator's field note

E3Z-FTP22 is a through-beam photoelectric sensor with a 20 m max sensing distance. PNP output, M12 4-pin connector. Supply 10 to 30 VDC. L-ON/D-ON selectable via DIP. Rectangular plastic body, M18 nose mount.

Peer comparison – E3S-CT11

E3Z-FTP22 uses a PNP-only output and M12 connector; the E3S-CT11 offers both NPN and PNP outputs on a pre-wired 2 m cable. Wiring and output circuit differ, so a swap requires cable replacement and output logic adaptation.

Mount via M18 threaded nose or bracket. M12 4-pin connector; supply 10 to 30 VDC. Select L-ON or D-ON via DIP on the sensor. Through-beam set includes separate emitter and receiver; align across a 20 m gap. Infrared LED source eliminates ambient light interference in most indoor lines.

Frequently asked questions

Will E3Z-FTP22 drop into a panel that was specified around E3S-CT11 without rewiring?

No. E3Z-FTP22 uses an M12 4-pin connector, while E3S-CT11 has a pre-wired 2 m cable. Also, E3S-CT11 offers NPN/PNP output; E3Z-FTP22 is PNP-only. Wiring and output circuit must be adapted.

What is the body type of E3Z-FTP22?

Rectangular compact plastic body with M18 nose mount.

MPN
E3Z-FTP22