Skip to main content
Log in
Omron E3ZLL88OMS — Photoelectric Sensors

Omron E3ZLL88OMS Distance-Setting Sensor, PNP, 300mm, IP67

MPNE3ZLL88OMS

Omron E3Z, Distance-Setting Photoelectric Sensor, PNP, 25–300 mm, LED Red, M8 4-Pin Connector, IP67, 12–24 VDC.

$294.85 – $308.30Ref. price · indicative, final on quote
Omron E3ZLL88OMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E3ZLL88OMS — Identification
ParameterValue
SeriesE3Z
Sensor typeDistance-Setting Sensor
E3ZLL88OMS — Sensing
ParameterValue
Sensing distance, max.300 mm
Sensing distance, min.25 mm
Response time500 us
Light typeLED, Red
E3ZLL88OMS — Electrical
ParameterValue
Operating voltage, min.12 V
Operating voltage, max.24 V
E3ZLL88OMS — Output
ParameterValue
Output typePNP
Load current100 mA
Switching typeLight-ON / Dark-ON
E3ZLL88OMS — Connection
ParameterValue
Termination typeConnector, M8, 4-Pin
E3ZLL88OMS — Environmental
ParameterValue
Protection rating (IP)IP67
Operating temperature, min.-10 °C
Operating temperature, max.55 °C
E3ZLL88OMS — Mechanical
ParameterValue
Length20 mm
Width10.8 mm
Height31 mm

Product details

Quick integrator note

The Omron E3ZLL88OMS is a distance-setting photoelectric sensor in the E3Z series. Sense range is adjustable from 25 mm to 300 mm via the teach button — no background-suppression gimmicks, true distance measurement by triangulation. Output is PNP, selectable Light-ON or Dark-ON, switching at 500 µs. Supply range 12–24 VDC.

Fit and termination

Housing is 10.8 mm wide, 31 mm high, 20 mm deep. Terminates via an M8 4-pin connector.

Compared to the cable-terminal variant

The closest same-function peer is the E3ZLL832MOMS — identical electrically (300 mm range, 500 µs, PNP) but ships with a 2 m cable instead of the M8 connector. If your panel was wired for a cable-terminated sensor, the E3ZLL88OMS won't drop in without a mating cordset. For a new build or a panel with M8 receptacles already in place, the connector saves field wiring time and makes replacement faster — no stripping, no screw terminals.

Frequently asked questions

Can I use the E3ZLL88OMS in a panel originally designed for the E3ZLL832MOMS?

Electrically yes — same ratings, same output type. But the E3ZLL832MOMS uses a 2 m cable, while the E3ZLL88OMS uses an M8 4-pin connector. You'll need an M8 male-to-female cordset to interface with the existing wiring; the sensor body itself fits the same cutout and mounts identically.

MPN
E3ZLL88OMS