The Omron E3ZLS86OMS is a current-production diffuse reflective distance-setting sensor from the E3Z series, delivering 200 mm sensing range with a 1 ms response time and PNP output via an M8 connector. Rated for 12–24 VDC supply and 100 mA load current, the sensor switches light-on or dark-on (selectable) and is sealed to IP67, suitable for washdown or dusty environments across -25 to 55 °C. The 10.8 mm body width and 31 mm height match the standard E3Z footprint, fitting the same bracket and cutout as the cable-terminated siblings.
Same sensor, different passport
Compared to the E3ZLS812MOMS (cable termination), the E3ZLS86OMS is electrically and mechanically identical except for the M8 connector. The sensor occupies the same 10.8 x 31 x 20 mm space and shares all ratings: 200 mm range, PNP, 1 ms response, IP67. If your panel was built around the cable version, swapping to the connector variant requires adding an M8 mating cable but no bracket or cutout change. The wiring labor shifts from panel-side stripping to connector plug-in—a tradeoff between field-fix speed and pre-wired convenience. Against the laser-based E3ZLL86OMS, this model uses a red LED (200 mm maximum) versus the laser’s 300 mm range and narrower beam. The laser also has a -10 °C minimum operating temperature versus -25 °C here—relevant for cold environments.
Lifecycle & sourcing posture
Because it is current-model, cross-region availability is typical. Genuine parts carry the same Omron nameplate regardless of origin. For the best lead-time, source against an RFQ; we can match your required quantity from multiple warehouses.
Panel fit & wiring note
The sensor measures 10.8 mm (W) x 31 mm (H) x 20 mm (D) and mounts in the standard E3Z bracket set. The M8 male connector accepts standard M8 female cables; order a mating cordset separately if not available via RFQ confirmation. The response time is 1 ms. Sensing range is 200 mm maximum and 20 mm minimum; place the target within that span to maintain reliable detection.