Omron E3Z series, through-beam photoelectric sensor, E3ZLT86LOMS, PNP, red LED, 60m range, M8 connector.
| Parameter | Value |
|---|---|
| Series | E3Z |
| Sensor type | Through Beam |
| Parameter | Value |
|---|---|
| Sensing distance, max. | 60 m |
| Response time | 1 ms |
| Light type | LED, Red |
| Parameter | Value |
|---|---|
| Operating voltage, min. | 12 V |
| Operating voltage, max. | 24 V |
| Parameter | Value |
|---|---|
| Output type | PNP |
| Load current | 100 mA |
| Switching type | Light-ON / Dark-ON |
| Parameter | Value |
|---|---|
| Termination type | Connector, M8, 4-Pin |
| Parameter | Value |
|---|---|
| Protection rating (IP) | IP67 |
| Operating temperature, min. | -10 °C |
| Operating temperature, max. | 55 °C |
| Parameter | Value |
|---|---|
| Length | 20 mm |
| Width | 10.8 mm |
| Height | 31 mm |
The Omron E3ZLT86LOMS is a through-beam photoelectric sensor in the E3Z series, delivering a 60 m sensing distance with a red LED light source. PNP output, 1 ms response, and IP67 rating make it a direct fit for conveyor, palletizer, and long-range presence detection. M8 connector, 4-pin, matches existing E3Z harnesses.
Dimensions: 10.8 mm width, 31 mm height, 20 mm length. M8 connector and IP67 rating.
Yes. Both share the same M8 4-pin connector, PNP output, and 10.8 mm x 31 mm x 20 mm dimensions. The only difference is the light source (red LED vs red laser), which does not affect mechanical or wiring fit.
No related articles