Skip to main content
Log in
Omron E3ZT815MOMS — Photoelectric Sensors

Omron E3ZT815MOMS Through-Beam Sensor, PNP 15m IP69K

MPNE3ZT815MOMS

Omron E3Z series through-beam optical sensor, PNP output, 15 m sensing distance, 5 m cable, IP69K / IP67.

$186.35Ref. price · indicative, final on quote
Omron E3ZT815MOMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E3ZT815MOMS — Identification
ParameterValue
SeriesE3Z
Sensor typeThrough-Beam Sensor
E3ZT815MOMS — Sensing
ParameterValue
Sensing distance, max.15 m
Response time1 ms
Light typeInfrared LED
E3ZT815MOMS — Electrical
ParameterValue
Operating voltage, min.10.8 VDC
Operating voltage, max.26.4 VDC
E3ZT815MOMS — Output
ParameterValue
Output typePNP
Load current100 mA
Switching typeLight-ON / Dark-ON
E3ZT815MOMS — Connection
ParameterValue
Termination typeCable, 5 m
E3ZT815MOMS — Environmental
ParameterValue
Protection rating (IP)IP69K;IP67
Operating temperature, min.-25 °C
Operating temperature, max.55 °C
E3ZT815MOMS — Mechanical
ParameterValue
Length17 mm
Width11 mm
Height31 mm

Product details

Part overview

The Omron E3ZT815MOMS is a through-beam optical sensor from the E3Z series, rated for a 15 m sensing distance with a PNP output and a 5 m cable. It switches 100 mA loads in 1 ms and operates from 10.8 to 26.4 VDC over -25 to 55 °C.

The IP69K rating withstands high-pressure, high-temperature washdowns, a step beyond the IP67 of the connector-based E3ZT86OMI. The fixed 5 m cable entry avoids moisture ingress risk of an M8 connector. Voltage range is wider than the E3ZT86OMI (10.8–26.4 VDC vs 12–24 VDC), so it holds regulation on longer cable runs where voltage drop is a concern. The response time (1 ms) is the same across both.

Mounting and wiring check

This version terminates with a 5 m cable — you'll need a cable gland or strain relief at the panel entry; no M8 connector to dock. Dimensions: 11 mm wide, 31 mm tall, 17 mm deep. Fits standard E3Z brackets.

Frequently asked questions

What is the closest functional alternative — the E3ZT86OMI?

The E3ZT86OMI is a through-beam PNP sensor with the same 15 m range and 1 ms response, but it uses an M8 connector instead of a cable and carries only IP67 — not IP69K. It also has a tighter voltage range (12–24 VDC). It will not drop in without changing termination.

Will the E3ZT815MOMS drop into a panel designed for the E3ZT86OMI without rewiring?

No. The E3ZT86OMI uses an M8 connector; the E3ZT815MOMS has a fixed 5 m cable. You would need to remove the connector and terminate the cable into a gland or terminal block. The mounting footprint is nearly identical (11 mm vs 10.8 mm width), so the bracket is compatible.

What is the width of the E3ZT815MOMS?

Listed width is 11 mm.

What is the height of the E3ZT815MOMS?

Listed height is 31 mm.

MPN
E3ZT815MOMS