Schneider 140AMM09000C Analog I/O Module
MPN140AMM09000C
End of Life
Analog Input Module
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Fault type | Open circuit input/output circuit Overtacking scale (unipolar) input circuit Status byte output circuit |
| Type of filter | Single pole low pass - 3 dB at 21 Hz +/- 20 % input circuit |
| Range of product | Modicon Quantum automation platform |
| Analogue input type | Bipolar current +/- 20 mA 15 bits DC Bipolar voltage +/- 10 V 16 bits DC Bipolar voltage +/- 5 V 15 bits DC Unipolar current 0...20 mA 15 bits DC Unipolar offset current 4...20 mA 14 bits DC Unipolar offset voltage 1...5 V 14 bits DC Unipolar voltage 0...10 V 16 bits DC Unipolar voltage 0...5 V 15 bits DC |
| Product or component type | Input/output analog module |
| Loop voltage | 0...60 V DC with external resistance output circuit 7...30 V DC output circuit |
| Maximum voltage drop | <30 V DC 20 mA |
| Bus current requirement | 350 mA |
| External power requirement | 7...30 V output circuit |
| Relative humidity | 95 % without condensation |
| Operating altitude | <= 16404.2 ft (5000 m) |
| Standards | UL 508 CSA C22.2 No 142 |
All specifications
| Parameter | Value |
|---|---|
| Offset | +/- 0.0014 % of full scale maximum/°C 0...60 °C input circuit |
| Marking | CE |
| Category | 18155-QUANTUM I/O & POWER SUPPLIES |
| Linearity | 2.4 % over and under range voltage 2.4 % over range, and - 9.6 % under range current Monotonic +/- 1 LSB input Monotonic +/- 1 LSB output |
| Gain shift | +/- 0.002 of full scale maximum 0...60 °C input circuit |
| Update time | 15 ms output circuit 320 ms input circuit |
| Setting time | 900 µs to +/- 0.1 % of the final value output circuit |
| Module format | Standard |
| I (O modularity) | 6 channels |
| Input impedance | > 10 MOhm voltage > 250 Ohm current |
| Local signalling | 1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault 6 LEDs (green) for channel is turned on 6 LEDs (red) for channel fault |
| Protective treatment | Conformal coating Humiseal 1A33 |
| Analogue input number | 4 |
| Analogue output range | 4...20 mA |
| Common mode rejection | > 80 dB 50/60 Hz input circuit |
| Absolute maximum input | +/- 25 mA current +/- 50 V voltage |
| Addressing requirement | 2 output words 5 input words |
| Analogue output number | 2 |
| Absolute accuracy error | +/- 0.004 % of full scale 32...140 °F (0...60 °C) output circuit +/- 0.007 %/°C of full scale maximum 32...140 °F (0...60 °C) output circuit +/- 0.03 % 77 °F (25 °C) input circuit +/- 0.05 % of full scale maximum 77 °F (25 °C) input circuit +/- 0.20 % of full scale 77 °F (25 °C) output circuit |
| Analogue output resolution | 12 bits |
| Isolation between channels | 500 V AC for 1 minute 750 V DC for 1 minute |
| Isolation between channels and bus | 500 V AC for 1 minute 750 V DC for 1 minute |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Resistance to electromagnetic fields | 9.1 V/m (10 V/m) 80...2000 MHz IEC 801-3 |
| Ambient air temperature for operation | 32...140 °F (0...60 °C) |
| Isolation between input channel and output channel | 500 V for 1 minute 750 V for 1 minute |
MPN
140AMM09000C