Skip to main content
Log in
Schneider Electric BMECRD0100

Schneider BMECRD0100 X80 Ethernet RIO Adaptor, 24 V DC

MPNBMECRD0100
Active

Schneider Electric EcoStruxure Automation Expert Modicon X80 Ethernet RIO drop adaptor, double module, 24 V DC, 295 mA, 10/100 Mbit/s.

Schneider Electric BMECRD0100 datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMECRD0100 key specifications
ParameterValue
ProtocolBus X across the remote backplane Ethernet across the remote backplane
Range of productEcoStruxure Automation Expert
Product or component typeDPAC module
Communication network typeIPv4 (internet protocol) IPv6 (internet protocol)
Integrated connection type1 Ethernet TCP/IP service or distributed equipment 2 Ethernet TCP/IP Ethernet RIO Network (RSTP)
Input voltage24 V DC
Current consumption295 mA
IP degree of protectionIP20
Communication serviceEthernet/IP adapter RSTP (Ring topology support) Ethernet RIO network Quality of Service (QoS) DHCP client TFTP client FTP client FDR client NTP client
Communication port protocolEtherNet/IP
Mounting modeRack-mounted
Relative humidity5...95 % without condensation

All specifications

BMECRD0100 additional specifications
ParameterValue
Operating altitude0...6561.68 ft (0...2000 m)
Depth5.2 in (131 mm)
Width2.5 in (64 mm)
Height5.2 in (131 mm)
StandardsEN/IEC 61131-2 EN/IEC 61010-2-201 UL 61010-2-201 CSA C22.2 No 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 61850-3, location G UL 121201 CSA C22.2 No 213
MarkingCE
CategoryUS1PC1522555
TopologyRing
Directives2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility
Fixing modeBy screws
CybersecurityFirmware signature
Exchange modeHalf duplex, full duplex, autonegotiation, auto MDIX
Module formatDouble
Port ethernet10/100BASE-TX
Condition of useSoftdPAC required
Local signalling1 LED (green) for module active (RUN) 1 LED (red) for I/O error (I/O) 1 LED (green/red) for module status (Mod Status) 1 LED (green/red) for network communication status (Net Status) 1 LED (green) for download in progress (DL) 1 LED (green/red) for cyber security (SEC)
Transmission rate10/100 Mbit/s
Device applicationX80 Ethernet RIO drop adaptor
Function availableInput data is collected and published to the remote I/O head adaptor Output modules are updated with the data received from remote I/O head adaptor System time stamping I/O extension rack
Environmental characteristicStandard environment
Product specific applicationFor remote I/O modules
Ambient air temperature for storage-40...185 °F (-40...85 °C)
Ambient air temperature for operation32...140 °F (0...60 °C)

Product details

The Schneider BMECRD0100 is the Ethernet RIO drop adaptor for a Modicon X80 remote rack in an EcoStruxure Automation Expert distributed PAC system. It handles ring-topology communications at 10/100 Mbit/s over two Ethernet ports — one for the main network, one for the RIO ring (RSTP). Powers off 24 V DC and draws 295 mA from the backplane. Occupies a double slot — 64 mm wide, 131 mm deep and tall — so plan for that width in the rack layout. IP20 rating suits a clean indoor cabinet.

Rack-mounted, secured by screws. Requires SoftdPAC firmware installed on the host PAC. Local signalling includes RUN, I/O error, module status, network status, download-in-progress, and cybersecurity LEDs — useful for commissioning and fault finding. Supports EtherNet/IP adapter mode, RSTP ring, QoS, DHCP, TFTP, FTP, FDR, and NTP clients. Functionally, collects input data and publishes it to the remote I/O head adaptor, updates output modules, and provides system time stamping for the I/O extension rack. Operates in standard environment from 0 to 60 °C ambient, with storage range -40 to 85 °C.

Frequently asked questions

What are the physical dimensions of the BMECRD0100?

The module is a double slot in the X80 rack: width 64 mm, depth 131 mm, height 131 mm. It is rack-mounted with screws.

What compliance documentation is available for the BMECRD0100?

The adaptor carries CE marking and complies with UL 61010-2-201, CSA C22.2 No 61010-2-201, IEC 61131-2, IEC 61000-6-5, IEC 61850-3, and the low-voltage (2014/35/EU) and EMC (2014/30/EU) directives.

MPN
BMECRD0100