Skip to main content
Log in
Schneider Electric BMECRD0100C

Schneider BMECRD0100C RIO Drop Adaptor, Conformal Coated

MPNBMECRD0100C
Active

Schneider Electric EcoStruxure Automation Expert, Modicon X80 adapter for dPAC, Ethernet, conformal coated, BMECRD0100C.

Schneider Electric BMECRD0100C datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMECRD0100C key specifications
ParameterValue
ProtocolBus X across the remote backplane Ethernet across the remote backplane
Range of productEcoStruxure Automation Expert
Product or component typeDPAC module
Communication network typeIPv4 (internet protocol) IPv6 (internet protocol)
Integrated connection type1 Ethernet TCP/IP service or distributed equipment 2 Ethernet TCP/IP Ethernet RIO Network (RSTP)
Input voltage24 V DC
Current consumption295 mA
IP degree of protectionIP20
Communication serviceEthernet/IP adapter RSTP (Ring topology support) Ethernet RIO network Quality of Service (QoS) DHCP client TFTP client FTP client FDR client NTP client
Communication port protocolEtherNet/IP
Mounting modeRack-mounted
Relative humidity5...95 % without condensation

All specifications

BMECRD0100C additional specifications
ParameterValue
Operating altitude0...6561.68 ft (0...2000 m)
Depth5.2 in (131 mm)
Width2.5 in (64 mm)
Height5.2 in (131 mm)
StandardsEN/IEC 61131-2 EN/IEC 61010-2-201 UL 61010-2-201 CSA C22.2 No 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 61850-3, location G EN/IEC 60079-0 UL 121201 CSA C22.2 No 213
MarkingCE
CategoryUS1PC1522555
TopologyRing
Directives2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive
Fixing modeBy screws
CybersecurityFirmware signature
Exchange modeHalf duplex, full duplex, autonegotiation, auto MDIX
Module formatDouble
Port ethernet10/100BASE-TX
Condition of useSoftdPAC required
Local signalling1 LED (green) for module active (RUN) 1 LED (red) for I/O error (I/O) 1 LED (green/red) for module status (Mod Status) 1 LED (green/red) for network communication status (Net Status) 1 LED (green) for download in progress (DL) 1 LED (green/red) for cyber security (SEC)
Transmission rate10/100 Mbit/s
Device applicationX80 Ethernet RIO drop adaptor
Function availableInput data is collected and published to the remote I/O head adaptor Output modules are updated with the data received from remote I/O head adaptor System time stamping I/O extension rack
Protective treatmentConformal coating
Environmental characteristicGas resistant class Gx ISA S71.04 Gas resistant class 3C4 IEC 60721-3-3 Dust resistant class 3S4 IEC 60721-3-3 Sand resistant class 3S4 IEC 60721-3-3 Salt resistant level 2 IEC 68252 Mold growth resistant class 3B2 IEC 60721-3-3 Fungal spore resistant class 3B2 IEC 60721-3-3
Product specific applicationFor remote I/O modules
Ambient air temperature for storage-40...185 °F (-40...85 °C)
Ambient air temperature for operation32...140 °F (0...60 °C)

Product details

What the Conformal Coating Changes

Compared to the standard BMECRD0100, the BMECRD0100C adds protective treatment against gas resistant class Gx (ISA S71.04), dust and sand class 3S4, salt level 2, and mold/fungal spore class 3B2 per IEC 60721-3-3. If your existing panel was wired for BMECRD0100, the BMECRD0100C fits the same rack, same screw pattern, same Ethernet cabling — no rewiring required. Order the C-suffix only when the environmental class demands it; otherwise the uncoated variant may suffice.

Compliance and Standards Coverage

CE marked, compliant with low voltage (2014/35/EU), EMC (2014/30/EU), and ATEX (2014/34/EU) directives. Listed standards include EN/IEC 61131-2, EN/IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No 61010‑2‑201, IACS, EN/IEC 61000-6-5 (interface type 1 and 2), EN/IEC 61850-3 (location G), EN/IEC 60079-0, UL 121201, and CSA C22.2 No 213. SoftdPAC required for firmware operation.

Frequently asked questions

What is the difference between BMECRD0100C and BMECRD0100?

The BMECRD0100C is the conformal-coated variant of BMECRD0100. It adds protective treatment for gas, dust, salt, and fungal environments while maintaining the same dimensions, mounting, and electrical interface. For standard indoor environments the uncoated version may be suitable, but the C-suffix is specified when harsh environmental class (ISA S71.04 or IEC 60721-3-3) is required.

What are the physical dimensions of BMECRD0100C?

Depth is 5.2 in (131 mm), width is 2.5 in (64 mm), height is 5.2 in (131 mm). It is a double-format module that mounts on the X80 rack.

What compliance documentation does Schneider provide for this module?

The module carries CE marking and is covered under low-voltage, EMC, and ATEX directives. Standards include EN/IEC 61131-2, EN/IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No 61010‑2‑201, IACS, EN/IEC 61000-6-5, EN/IEC 61850-3, EN/IEC 60079-0, UL 121201, and CSA C22.2 No 213. Gas, dust, sand, salt, and fungal resistance specs are per ISA S71.04 and IEC 60721-3-3.

MPN
BMECRD0100C