Skip to main content
Log in
Schneider Electric A9C24763

Schneider A9C24763 Acti 9 iCT Remote Control Switch, 3-pole, 63 A

MPNA9C24763
Obsolete

Schneider Acti 9 iCT remote control switch, order code A9C24763, 3-pole, 63 A switching current, 240 V AC coil, clip-on mounting, IP20, IEC/EN 61095.

$307.52Ref. price · indicative, final on quote
Schneider Electric A9C24763 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9C24763 key specifications
ParameterValue
Control typeRemote control
Network typeAC
Technology typeDesynchronized neutral pole
Range of productActi9
Control signal typeMaintained
Product or component typeContactor
Coil voltage230...240 V AC 50 Hz
Voltage440 V AC 50/60 Hz
[Ue] rated operational voltage220...240 V AC 50 Hz
[Uimp] rated impulse withstand voltage4 kV
[Ie] rated operational current63 A AC-7A 20 A AC-7B
Maximum power2.1 W at 220...240 V AC

All specifications

A9C24763 additional specifications
ParameterValue
Inrush power in53 VA
Hold-in power consumption in6.5 VA
Network frequency50 Hz
Switching frequency100 switching operations/day
Poles3P + N
Pole contact composition4 NO
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Mounting modeClip-on
Mounting support35 mm symmetrical DIN rail
Connections - terminalsControl circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid Control circuit: tunnel type terminals1 cable(s) 1.5...2.5 mm² rigid Power circuit: tunnel type terminals1 cable(s) 6...16 mm² flexible Power circuit: tunnel type terminals1 cable(s) 6...25 mm² rigid Control circuit: tunnel type terminals2 cable(s) 1.5...2.5 mm² flexible
Pollution degree2
Relative humidity95 % at 55 °C
Operating altitude2000 m
Depth60 mm
Width54 mm
ColorWhite
Height85 mm
Electrical durability100000 cycles IEC/EN 61095 63 A 50 Hz AC-7A 30000 cycles IEC/EN 61095 20 A 50 Hz AC-7B 30000 cycles IEC/EN 61095 50 Hz AC-7C 100000 cycles EN/IEC 60947-4-1 50 Hz AC-1 30000 cycles EN/IEC 60947-4-1 50 Hz AC-3 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5a 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5b
Mechanical durability1000000 cycles
StandardsIEC/EN 61095
Noise level30 dB
9 mm pitches6
Market segmentSmall commercial Residential
Tropicalisation2 conforming to EN 60947-4-1 2 conforming to EN 61095 2 conforming to IEC 1095
Condition of useLED lighting should be controlled as a group
Local signallingAction indicator
Device short nameiCT
Tightening torqueControl circuit: 0.8 N.m Power circuit: 3.5 N.m
Compatibility codeICT
Device applicationLighting
Ambient air temperature for storage-40...70 °C
Ambient air temperature for operation-5...60 °C

Product details

Overview

The A9C24763 is a Schneider Acti 9 iCT remote control switch, a 3-pole device rated for 63 A switching current on AC networks at 50 Hz. It operates from a 240 V AC coil supply, clips onto DIN rail, and carries an IP20 enclosure rating for in-panel installation.

The desynchronized neutral pole technology ensures the neutral pole opens after the phase poles and closes before them, reducing arcing on the neutral and improving safety during switching. The 4 NO contact composition (4 normally open poles) means all poles are open when de-energized, providing positive isolation in the off state.

Applications

The Acti 9 iCT series is designed for remote switching of lighting circuits in small commercial and residential buildings. Typical installations include stairwells, corridors, parking garages, and open-plan offices where centralized control reduces energy waste and simplifies maintenance. The maintained control signal allows integration with occupancy sensors, time clocks, or KNX/DALI gateways without additional latching relays.

MPN
A9C24763