Skip to main content
Log in
Schneider Electric A9C62463

Schneider A9C62463 Reflex iC60N Ti24 63 A 4P curve C integrated control MCB

MPNA9C62463
Active

Schneider A9C62463 Molded Case Circuit Breakers — now discontinued, supplied from remaining surplus and broker stock.

$309.88Ref. price · indicative, final on quote
Schneider Electric A9C62463 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9C62463 key specifications
ParameterValue
Control typeRemote control by pulse Toggle Remote control by continuous command ON/OFF button
Network typeAC
Control signal typeImpulse Maintained Maintained very low voltage
Product or component typeIntegrated control circuit breaker
Supply voltage230 V AC at 50/60 Hz
Coil voltage230 V AC 50/60 Hz 24 V AC 50/60 Hz 48 V AC 50/60 Hz 24 V DC 48 V DC
Voltage500 V AC
Breaking capacity20 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
Current63 A
Breaking capacity codeN
Network frequency50/60 Hz
Poles description4P

All specifications

A9C62463 additional specifications
ParameterValue
Number of protected poles4
IP degree of protectionIP20 conforming to IEC 60529
Mounting modeFixed
Mounting support35 mm symmetrical DIN rail
Pollution degree3
Relative humidity93 % at 40 °C
Depth77 mm
Width117 mm
ColorWhite
Height84 mm
Electrical durabilityAC-1: 50000 cycles AC 50 Hz
Mechanical durability50000 cycles
RangeActi9
Curve codeC
9 mm pitches13
Tropicalisation2
Local signallingRed LED: fault Green LED: device ON Flashing LED: device tripped Flashing LED: device overheat Flashing LED: device ready
Device short nameReflex iC60N
Device applicationDistribution Control
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Provision for padlockingPadlockable
Contact position indicatorYes
Locking options descriptionPadlock in OFF position

Product details

Overview

The A9C62463 is a Schneider Reflex iC60N Ti24 integrated control circuit breaker from the Acti9 range, rated 63 A on a 4-pole frame with a C curve and a 230 V AC control coil. It combines overcurrent protection and remote switching in one DIN-rail mountable unit, with thermal-magnetic trip and local signalling via a multi-colour LED.

The A9C62463 carries a 63 A switching current across 4 poles, while the M9F22313 is a 3-pole unit rated 13 A — pick the A9C62463 when the BOM calls for a 4-pole, 63 A integrated control breaker rather than a 3-pole, 13 A standard MCB.

MPN
A9C62463