Skip to main content
Log in
Schneider Electric A9C65240

Schneider A9C65240 Reflex iC60H integrated control MCB, 40 A, 2P, curve C

MPNA9C65240
Obsolete

Schneider A9C65240 Din Rail Mount Circuit Breakers — now discontinued, supplied from remaining surplus and broker stock.

$200.03Ref. price · indicative, final on quote
Schneider Electric A9C65240 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9C65240 key specifications
ParameterValue
Control typeON/OFF button Toggle Remote control by continuous command Remote control by pulse
Network typeAC
Control signal typeMaintained Impulse Maintained very low voltage
Product or component typeIntegrated control circuit breaker
Supply voltage230 V AC at 50/60 Hz
Coil voltage230 V AC 50/60 Hz 24 V AC 50/60 Hz 48 V AC 50/60 Hz 24 V DC 48 V DC
Voltage500 V AC
Breaking capacity30 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 15 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
Current40 A
Breaking capacity codeH
Network frequency50/60 Hz
Poles description2P

All specifications

A9C65240 additional specifications
ParameterValue
Number of protected poles2
IP degree of protectionIP20 conforming to IEC 60529
Mounting modeFixed
Mounting support35 mm symmetrical DIN rail
Pollution degree3
Relative humidity93 % at 40 °C
Depth77 mm
Width81 mm
ColorWhite
Height84 mm
Electrical durabilityAC-1: 50000 cycles AC 50 Hz
Mechanical durability50000 cycles
RangeActi9
Curve codeC
9 mm pitches9
Tropicalisation2
Local signallingFlashing LED: device overheat Flashing LED: device tripped Flashing LED: device ready Red LED: fault Green LED: device ON
Device short nameReflex iC60H
Device applicationDistribution Control
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Provision for padlockingPadlockable
Contact position indicatorYes
Locking options descriptionPadlock in OFF position

Product details

Overview

The A9C65240 is a Schneider Reflex iC60H integrated control circuit breaker combining a 40 A thermal-magnetic trip (curve C) with a 230 V AC coil for remote ON/OFF switching via maintained, impulse, or very low voltage signals. Rated for 50,000 electrical cycles at AC-1 and 50,000 mechanical cycles, it includes a padlockable OFF position and a contact position indicator for lockout/tagout compliance.

The 230 V AC coil draws control power from the same line; for panels using a 24 V DC control bus, consider a separate control transformer or a different Reflex variant.

MPN
A9C65240