Skip to main content
Log in
Schneider Electric A9D35606 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9D35606 Acti9 iDPN Vigi RCBO, 6 A C-curv

MPNA9D35606
Active

Schneider Electric Acti9 iDPN Vigi, RCBO, 1P+N, 6 A, C-curve, 30 mA earth-leakage, 4500 A Icn, DIN rail clip-on.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9D35606 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)30 mA
Earth-leakage protection class / typeType A
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage independent
Trip unit technologyThermal-magnetic
Local signalling / indicationON, OFF, fault trip
A9D35606 — Electrical Ratings
ParameterValue
Rated current (In)6 A
Rated operational voltage (Ue)230...240 V AC 50 Hz
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)400 V AC 50 Hz
Rated impulse withstand voltage (Uimp)4 kV
Overvoltage categoryIII conforming to IEC 60364
Device location in systemOutgoer
Electrical durability20000 cycles
Mechanical durability (operating cycles)20000 cycles
A9D35606 — Identification
ParameterValue
Product nameActi9 iDPN Vigi
Product / component typeResidual current breaker with overcurrent protection (RCBO)
Product range / familyActi9
Device short nameiDPNa Vigi
A9D35606 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsSingle terminal top or bottom 1...16 mm² rigid Single terminal top or bottom 1...10 mm² flexible Single terminal top or bottom 1...10 mm² flexible with ferrule
Wire stripping length15 mm for top or bottom connection
Terminal tightening torque2 N.m top or bottom
Width36 mm
Height85 mm
Depth73 mm
A9D35606 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3
Relative humidity95 % at 55 °C
Tropicalisation2 conforming to IEC 60068-1
A9D35606 — Approvals
ParameterValue
StandardsEN/IEC 61009-2-1

Product details

The Schneider Electric A9D35606 is an Acti9 iDPN Vigi RCBO — a combined overcurrent and residual-current device in a single 36 mm wide module, 1 pole + neutral, rated 6 A with a C-curve magnetic trip (5–10 x In) and 30 mA earth-leakage sensitivity. It clips onto a DIN rail, neutral on the left, and breaks 4500 A at 230–240 V AC, 50 Hz, per EN/IEC 61009-2-1.

Clip-on mounting on a DIN rail, 4 modules wide at 9 mm pitch (36 mm total). Terminals accept 1–16 mm² rigid or 1–10 mm² flexible, stripped 15 mm, torqued to 2 N·m. IP20 on the body, IP40 inside a modular enclosure — fine for a dry indoor distribution board, not for washdown. Pollution degree 3, overvoltage category III per IEC 60364: it's rated for the fixed installation inside a building's main or sub-distribution panel.

Frequently asked questions

What is the breaking capacity of A9D35606?

4500 A Icn at 230–240 V AC, 50 Hz, conforming to EN/IEC 61009-2-1.

What is A9D35606's earth-leakage sensitivity?

30 mA, integrated into the device.

Where can I buy A9D35606?

Sourced and quoted to order against an RFQ through independent distribution; availability and current pricing confirmed at quote time.

MPN
A9D35606