Skip to main content
Log in
Schneider Electric A9D35610 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9D35610 Acti9 iDPN Vigi RCBO, 10 A C-cur

MPNA9D35610
Active

Schneider Electric Acti9 iDPN Vigi RCBO, 1P+N, 10 A, C-curve, 30 mA earth leakage, 4500 A Icn, DIN rail mount.

$242.03Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9D35610 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)30 mA
Earth-leakage protection class / typeType A
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage independent
Trip unit technologyThermal-magnetic
Local signalling / indicationON, OFF, fault trip
A9D35610 — Electrical Ratings
ParameterValue
Rated current (In)10 A
Rated operational voltage (Ue)230...240 V AC 50 Hz
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)400 V AC 50 Hz
Rated impulse withstand voltage (Uimp)4 kV
Overvoltage categoryIII conforming to IEC 60364
Device location in systemOutgoer
Electrical durability20000 cycles
Mechanical durability (operating cycles)20000 cycles
A9D35610 — Identification
ParameterValue
Product nameActi9 iDPN Vigi
Product / component typeResidual current breaker with overcurrent protection (RCBO)
Product range / familyActi9
Device short nameiDPNa Vigi
A9D35610 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsSingle terminal top or bottom 1...16 mm² rigid Single terminal top or bottom 1...10 mm² flexible Single terminal top or bottom 1...10 mm² flexible with ferrule
Wire stripping length15 mm for top or bottom connection
Terminal tightening torque2 N.m top or bottom
Width36 mm
Height85 mm
Depth73 mm
A9D35610 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3
Relative humidity95 % at 55 °C
Tropicalisation2 conforming to IEC 60068-1
A9D35610 — Approvals
ParameterValue
StandardsEN/IEC 61009-2-1 EN/IEC 61009-1

Product details

The A9D35610: The 10 A rated current (In) with C-curve magnetic tripping (5–10 x In) means it holds momentary inrush from small motor or lighting loads but trips fast on a hard short — standard for general-purpose distribution in residential and light commercial panels. The 4500 A Icn breaking capacity at 230–240 V AC is the maximum fault current it can safely interrupt; that is adequate for most sub-distribution boards but check your point-of-supply SCCR if feeding from a high-capacity transformer. The 30 mA earth-leakage sensitivity provides personal protection (additional protection per IEC 60364) and is the most common threshold for socket-outlet circuits.

Clip-on mounting to DIN rail, 36 mm width (4 x 9 mm pitches), neutral on the left. Terminals accept 1–16 mm² rigid or 1–10 mm² flexible; strip length 15 mm, tighten to 2 N·m. IP20 finger-safe with the modular enclosure (IP40 in the enclosure). The toggle gives local ON/OFF/trip indication.

Frequently asked questions

What is the A9D35610 used for?

It is a 1P+N RCBO (residual current breaker with overcurrent) rated 10 A, C-curve, 30 mA earth leakage, used for final-circuit protection in distribution boards where both overcurrent and earth-fault protection are required in a single 36 mm module.

What is the breaking capacity of the A9D35610?

4500 A Icn at 230–240 V AC, 50 Hz, conforming to EN/IEC 61009-2-1.

MPN
A9D35610