The 6 kA Icn (per EN/IEC 60898-1) is the rated short-circuit capacity for general distribution; the 10 kA Icu (per IEC 60947-2) is the ultimate breaking capacity at 400...415 V AC, giving you SCCR headroom for industrial panel coordination studies. Three poles protected (3P), thermal-magnetic trip unit, 50 Hz network frequency. The clip-on mounting snaps onto standard DIN rail — 6 module pitches (54 mm wide) so it occupies the expected footprint for a 3-pole MCB. Tightening torque 2 N·m, strip length 13 mm.
This breaker carries dual certification to EN/IEC 60898-1 (the household / similar installation standard) and EN/IEC 60947-2 (the industrial low-voltage switchgear standard). In practice, that means it can serve in a distribution board under the domestic standard's 6 kA Icn rating, but also qualifies for industrial panel use where the 60947-2 rating of 10 kA Icu applies. Pollution degree 3 (conductive pollution typical in industrial enclosures) and limitation class 3 per 60898-1 confirm it limits let-through energy for downstream equipment protection.