Skip to main content
Log in
Schneider Electric A9N26904

Schneider A9N26904 Acti 9 OF auxiliary contact, 6 A, 1 C/O

MPNA9N26904
Active

Schneider A9N26904 Indication & Tripping Auxiliaries.

$5.16Ref. price · indicative, final on quote
Schneider Electric A9N26904 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

A9N26904 key specifications
ParameterValue
Range of productActi9
Product or component typeOC contact
Voltage500 V
[Uimp] rated impulse withstand voltage4 kV
Current0.1...6 A at 24...250 V, AC 50/60 Hz 0.1...6 A at 24...240 V, AC 50/60 Hz 0.1...3 A at 415 V, AC 50/60 Hz 0.1...6 A at 24 V, DC 0.1...2 A at 48 V, DC 0.1...1.5 A at 60 V, DC 0.1...1 A at 130 V, DC
IP degree of protectionIP20
Mounting modeClip-on
Mounting supportDIN rail
Mounting locationLeft side of circuit-breaker
Wire stripping length9 mm
Connections - terminalsScrew clamp terminal (bottom): 1 cable(s) 0.5...2.5 mm² - rigid Screw clamp terminal (bottom): 2 cable(s) 1.5 mm² - flexible Screw clamp terminal (bottom): 2 cable(s) 1.5 mm² - flexible with ferrule
Pollution degree3

All specifications

A9N26904 additional specifications
ParameterValue
Depth68 mm
Width9 mm
ColorWhite
Height85.3 mm
Product weight30 g
StandardsEN/IEC 60947-5-1 GB/T 14048.5
9 mm pitches1
Quality labelsEAC CCC
Tropicalisation2
Device short nameOF
Tightening torque1 N.m bottom
Signal contacts composition1 C/O
Ambient air temperature for storage-40...85 °C
Ambient air temperature for operation-25...70 °C
Comb busbar and distribution block compatibilityTop: YES

Product details

Overview

The A9N26904 is a Schneider Acti 9 OF auxiliary contact rated for 6 A switching current with a single C/O changeover contact, covering 24 VAC to 415 VAC and 24 VDC to 130 VDC. It clips onto the side of compatible Acti 9 C120, C60H-DC, SW60-DC, C60PV-DC, and xC60 breakers to provide remote indication of the main pole state. The part is active in Schneider's current catalogue; lead time is confirmed via RFQ.

Selection vs A9N26914

The A9N26904 switches 6 A, while the sibling A9N26914 is rated at 0.1 A. Use the A9N26904 when the indication circuit draws more than 100 mA or feeds a relay coil; the A9N26914 suits low-power PLC or electronic inputs where the contact must stay below 100 mA.

MPN
A9N26904