Schneider Electric Acti9 xC60 miniature circuit breaker, A9N3P63CGN, 63 A rated, C-curve, 3-pole, 10 kA breaking capacity, clip-on 35 mm DIN rail.
| Parameter | Value |
|---|---|
| Product name | XC60 |
| Product range | Acti9 |
| Product range (series) | Acti9 |
| Product/component type | Miniature circuit-breaker |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Rated current (In) | 63 A |
| Poles configuration | 3P |
| Number of protected poles | 3 |
| Breaking capacity | 10000 A Icn at 240 V AC 50/60 Hz conforming to IS/IEC 60898-1 10000 A Icn at 415 V AC 50/60 Hz conforming to IS/IEC 60898-1 |
| Rated operational voltage (Ue) | 220...240 V AC 50/60 Hz 380...415 V AC 50/60 Hz |
| Network type (AC/DC) | AC |
| Network frequency | 50/60 Hz |
| Overvoltage category | IV |
| Parameter | Value |
|---|---|
| Curve code | C |
| Trip unit technology | Thermal-magnetic |
| Magnetic tripping limit | 5...10 x In |
| Earth-leakage protection | Separate block |
| Limitation class | 3 conforming to IS/IEC 60898-1 |
| Electrical durability (cycles) | 10000 cycles |
| Mechanical durability (cycles) | 20000 cycles |
| Parameter | Value |
|---|---|
| Mounting support | 35 mm DIN rail |
| Mounting mode | Clip-on |
| Control type | Toggle |
| Terminal connection type | Biconnect (bottom) Tunnel type terminals (bottom) 25 mm² flexible Tunnel type terminals (bottom) 35 mm² rigid |
| Terminal tightening torque | 3.5 N.m |
| Wire stripping length | 13 mm for top or bottom connection |
| Contact position indicator | Yes |
| Local signalling/indication | ON/OFF indication |
| Width | 54 mm |
| Height | 85 mm |
| Depth | 77.5 mm |
| Number of 9 mm pitches | 6 |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -30...70 °C |
| Storage ambient temperature | -40...85 °C |
| IP degree of protection | IP20 |
| Pollution degree | 3 |
| Relative humidity | 95 % at 55 °C |
| Tropicalisation class | 2 conforming to IEC 60068-1 |
| Parameter | Value |
|---|---|
| Standards | IS/IEC 60898-1 |
The A9N3P63CGN is a 63 A, C-curve, 3-pole miniature circuit breaker from Schneider Electric's Acti9 range — the xC60 series. Its 10 kA breaking capacity at 240 V AC and 415 V AC (per IS/IEC 60898-1) means it can safely interrupt a fault current up to 10 000 A without welding the contacts or cascading upstream.
IP20 finger-safe terminals — fine inside a distribution board, not for outdoor or washdown duty.
The A9N3P63CGN is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.
The listed depth is 77.5 mm.
The range is Acti9, the product series is xC60.
The breaker is certified to IS/IEC 60898-1. Tropicalisation per IEC 60068-1 (class 2). Pollution degree 3. Overvoltage category IV.
No related articles