The A9N4P20DIN is a 4-pole miniature circuit breaker from the Schneider Acti9 xC60 range, rated 20 A with a D trip curve. The 10 kA breaking capacity at 380–415 V AC (IS/IEC 60947-2) tells you it can safely interrupt a fault current up to that level; at 220–250 V DC the Icu drops to 6 kA, so verify the available fault current on DC circuits. Thermal-magnetic trip unit, category A utilisation — no intentional short-time delay, so it clears fast on a hard fault. Clip-on mounting to a 35 mm DIN rail, 72 mm wide (8 x 9 mm pitches), 85 mm tall, 77.5 mm deep — fits a standard distribution board or enclosure.
Schneider Electric A9N4P20DIN Acti9 xC60 MCB, 20 A D Curve,
MPNA9N4P20DIN
Active
Schneider Electric Acti9 xC60 miniature circuit breaker, A9N4P20DIN, 4P, 20 A, D curve, 10 kA breaking capacity per IS/IEC 60947-2, clip-on 35 mm DIN rail.
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026
Specifications
| Parameter | Value |
|---|---|
| Product name | XC60 |
| Product range | Acti9 |
| Product range (series) | Acti9 |
| Product/component type | Miniature circuit-breaker |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Rated current (In) | 20 A |
| Poles configuration | 4P |
| Number of protected poles | 4 |
| Breaking capacity | 10 kA Inc at 380...415 V AC 50/60 Hz conforming to IS/IEC 60947-2 6 kA Icu at 220...250 V DC conforming to IS/IEC 60947-2 |
| Rated service breaking capacity (Ics) | 7.5 kA conforming to IS/IEC 60947-2 - 380...415 V AC 50/60 Hz 6 kA conforming to IS/IEC 60947-2 - 220...250 V DC |
| Rated operational voltage (Ue) | 220...240 V AC 50/60 Hz 380...415 V AC 50/60 Hz 220...250 V DC |
| Rated insulation voltage (Ui) | 500 V AC 50/60 Hz conforming to IS/IEC 60947-2 |
| Rated impulse withstand voltage (Uimp) | 4 kV conforming to IS/IEC 60947-2 |
| Network type (AC/DC) | AC DC |
| Network frequency | 50/60 Hz |
| Utilisation category | Category A conforming to IS/IEC 60947-2 |
| Overvoltage category | IV |
| Parameter | Value |
|---|---|
| Curve code | D |
| Trip unit technology | Thermal-magnetic |
| Magnetic tripping limit | 12 x In +/- 20 % |
| Earth-leakage protection | Separate block |
| Suitability for isolation | Yes conforming to IS/IEC 60947-2 |
| Limitation class | 3 conforming to IS/IEC 60947-2 |
| Electrical durability (cycles) | 20000 cycles |
| Mechanical durability (cycles) | 20000 cycles |
| Parameter | Value |
|---|---|
| Mounting support | 35 mm DIN rail |
| Mounting mode | Clip-on |
| Control type | Toggle |
| Terminal connection type | Tunnel type terminals (bottom) 16 mm² flexible Tunnel type terminals (bottom) 25 mm² rigid Biconnect (bottom) |
| Terminal tightening torque | 2 N.m |
| Wire stripping length | 13 mm for top or bottom connection |
| Contact position indicator | Yes |
| Local signalling/indication | ON/OFF indication |
| Width | 72 mm |
| Height | 85 mm |
| Depth | 77.5 mm |
| Number of 9 mm pitches | 8 |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -30...70 °C |
| Storage ambient temperature | -40...85 °C |
| IP degree of protection | IP20 |
| Pollution degree | 3 |
| Relative humidity | 95 % at 55 °C |
| Tropicalisation class | 2 conforming to IEC 60068-1 |
| Parameter | Value |
|---|---|
| Standards | IS/IEC 60947-2 |
Product details
Frequently asked questions
What is the breaking capacity of A9N4P20DIN?
10 kA Icn at 380–415 V AC 50/60 Hz per IS/IEC 60947-2, and 6 kA Icu at 220–250 V DC per the same standard.
Where can I buy A9N4P20DIN?
Sourced and quoted to order against an RFQ through independent distribution; availability and current pricing confirmed at quote time.
MPN
A9N4P20DIN