Skip to main content
Log in
Schneider Electric A9TPDD613 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9TPDD613 Acti9 iC40N ARC, 13 A, Curve B,

MPNA9TPDD613
Active

Schneider Electric Acti9 Active ARC iC40N, arc-fault detection device (AFDD), 1P+N, 13 A, curve B, 3/6/10 kA breaking capacity, clip-on DIN rail mount.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9TPDD613 — Residual Current Protection
ParameterValue
Trip unit technologyThermal-magnetic
Local signalling / indicationON, OFF, fault trip LED arc fault diagnostic
A9TPDD613 — Electrical Ratings
ParameterValue
Rated current (In)13 A
Rated operational voltage (Ue)230 V AC 50 Hz
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)250 V AC
Rated impulse withstand voltage (Uimp)4 kV
Device location in systemOutgoer
Electrical durability10000 cycles
Mechanical durability (operating cycles)20000 cycles
A9TPDD613 — Identification
ParameterValue
Product nameActi9 Active ARC iC40
Product / component typeActive arc fault detection circuit breaker
Product range / familyActi9
Device short nameiC40N ARC
A9TPDD613 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsTunnel type terminal 1...10 mm² flexible Tunnel type terminal 1...16 mm² rigid
Wire stripping length14 mm
Terminal tightening torque2 N.m
Width36 mm
Height91 mm
Depth73 mm
A9TPDD613 — Environmental
ParameterValue
Operating ambient temperature-25...40 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree2
Operating altitude2000 m
TropicalisationSeverity B conforming to IEC 60068-2-30 for 28 d
A9TPDD613 — Approvals
ParameterValue
StandardsEN/IEC 60898-1 EN/IEC 60947-2 EN/IEC 62606

Product details

Rated 13 A with a B curve (magnetic trip 3...5 × In), it clips onto DIN rail and fits a 36 mm width — four 9 mm pitches. Breaking capacity is 3 kA Icn at 230 V AC per EN/IEC 60898-1, 6 kA Icn at 230 V AC per the same standard, and 10 kA Icu at 230 V AC per EN/IEC 60947-2, covering both residential and industrial coordination requirements.

Clip-on mounting to DIN rail (35 mm) with tunnel-type terminals accepting 1...16 mm² rigid or 1...10 mm² flexible wire. Cable entry from top and bottom; neutral position left. IP20 finger-safe protection suits enclosed panel installation.

Local signalling includes ON/OFF toggle, fault-trip LED, and arc-fault diagnostic LED. Tropicalisation severity B per IEC 60068-2-30 for 28 days. Electrical durability 10,000 cycles, mechanical 20,000 cycles.

Frequently asked questions

Where can I buy A9TPDD613 and how do I get a price?

The A9TPDD613 is sourced to order against an RFQ through independent distribution. Submit an RFQ for current availability and pricing — confirmed at quote time, not a stock promise.

What is the closest alternative to A9TPDD613 in the Acti9 family?

Within the Acti9 Active ARC iC40 range, the primary variant difference is rated current and curve. The A9TPDD613 is 13 A curve B 1P+N; a higher-current or curve C sibling would differ in trip coordination. No pin-compatible drop-in exists without verifying the load's inrush profile and arc-fault detection requirements.

What compliance documentation does Schneider provide for A9TPDD613?

The device is certified to EN/IEC 60898-1, EN/IEC 60947-2, and EN/IEC 62606 (arc-fault detection device standard). Tropicalisation severity B per IEC 60068-2-30. Standard Schneider declarations of conformity cover CE and applicable national marks.

MPN
A9TPDD613