Schneider Electric ABE7R08S216
MPNABE7R08S216
Obsolete
sub-base - soldered electromechanical relays ABE7 - 8 channels - relay 5 mm
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Type | Latching |
| Protection type | Internal fuse 1 A 5 x 20 mm fast blow PLC end Adjustable by external fuse high breaking capacity preactuator end |
| Range of product | Modicon ABE7 |
| Terminal block type | Removable |
| Product or component type | Electromechanical output relay sub-base |
| Contacts type and composition | 1 NO preactuator end |
| Supply voltage limits | 30 V DC PLC end) |
| Maximum switching voltage | 380 V AC 50/60 Hz IEC 60947-5-1 220 V DC IEC 60947-5-1 |
| Supply voltage | 24 V DC PLC end |
| Threshold tripping voltage | 19.2 V 104 °F (40 °C) |
| Voltage | 2000 V |
| [Uimp] rated impulse withstand voltage | 5 kV IEC 60947-1 |
All specifications
| Parameter | Value |
|---|---|
| Current per channel | 2 A preactuator end |
| Minimum switching current | 2 mA >= 5 V |
| Maximum power dissipation per channel in | 0.3 W PLC end) |
| Operating rate in | 3 Hz no load 0.5 Hz at Ie |
| IP degree of protection | IP2X conforming to IEC 60529 |
| Installation category | II IEC 60664-1 |
| Connections - terminals | Screw type terminals, 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16) flexible with cable end Screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 12) solid Screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable end Screw type terminals, 2 x 0.09...2 x 0.75 mm² AWG 28...AWG 20) flexible with cable end Screw type terminals, 2 x 0.2...2 x 2.5 mm² AWG 24...AWG 14) solid |
| Resistance to incandescent wire | 1382 °F (750 °C) 30 s IEC 60695-2-11 |
| Pollution degree | 2 IEC 60664-1 |
| Vibration resistance | 2 gn (f= 10...150 Hz) conforming to IEC 60068-2-6 |
| Width | 4.9 in (125 mm) |
| Electrical durability | 500000 cycles 1500 mA 24 V DC-13 10 ms preactuator end) 500000 cycles 1000 mA 230 V AC-15 preactuator end) 500000 cycles 2000 mA 230 V AC-12 preactuator end) 500000 cycles 2000 mA 24 V DC-12 preactuator end) |
| Mechanical durability | 20000000 cycles |
| Category | 22375-INTERFACE MODULE(ABA,R,S) |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit) |
| Operating time | <= 5 ms coil energisation and NO closing |
| Tightening torque | 5.3 lbf.in (0.6 N.m) flat Ø 3.5 mm |
| Channels | 8 |
| Contact bounce time | <= 2 ms 1 NO |
| Dielectric strength | 2000 V IEC 60947-1 |
| Polarity distribution | Volt-free |
| Electrical reliability | 2e-006 |
| Max immunity to microbreaks | 3 ms |
| Resistance to fast transients | 2 kV level 3 IEC 61000-4-4 |
| Resistance to radiated fields | 9.1 V/m (10 V/m) 26000000...1000000000 Hz)IEC 61000-4-3 level 3 |
| Ambient air temperature for storage | -40...176 °F (-40...80 °C) IEC 61131-2 |
| Ambient air temperature for operation | 23...140 °F (-5...60 °C) IEC 61131-2 |
| Resistance to electrostatic discharge | 4 kV contact) level 3 IEC 61000-4-2 8 kV air) level 3 IEC 61000-4-2 |
MPN
ABE7R08S216