Schneider Electric ABE7S16S1B2
MPNABE7S16S1B2
Active
SUB-BASE - SOLDERED SOLID STATE
$121.92Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Fault type | Short-circuit Overload |
| Type | Soldered solid state relay |
| Range of product | Modicon ABE7 |
| Terminal block type | Removable |
| Product or component type | Solid state output relay sub-base |
| Drop-out voltage | 0.3 V preactuator end) |
| Supply voltage | 24 V DC PLC end 24 V DC preactuator end |
| Voltage state 0 guaranteed | 3.4 V PLC end |
| Voltage state 1 guaranteed | 16.9 V PLC end |
| Current per channel | 0.5 A preactuator end |
| Maximum residual current | 0.5 mA preactuator end |
| Maximum switching current | 700 mA DC-12 700 mA DC-13 |
All specifications
| Parameter | Value |
|---|---|
| Minimum switching current | 1 mA |
| Current state 0 guaranteed | 0.4 mA PLC end) |
| Current state 1 guaranteed | 3.1 mA PLC end) |
| Maximum current per output common | 9 A |
| Switching frequency | < 0.6/LI² Hz |
| IP degree of protection | IP2X conforming to IEC 60529 |
| Installation category | II IEC 60664-1 |
| Resistance to incandescent wire | 1382 °F (750 °C) 30 s IEC 60695-2-11 |
| Response time | <= 0.2 ms from state 0 to 1 |
| Pollution degree | 2 IEC 60664-1 |
| Shock resistance | 15 gn 11 ms IEC 60068-2-27 |
| Width | 4.9 in (125 mm) |
| Category | US10CP222375 |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit) |
| Fault indication | Without |
| Tightening torque | 5.3 lbf.in (0.6 N.m) flat Ø 3.5 mm |
| Channels | 16 |
| Protective treatment | TC |
| Maximum tungsten load | <10 W DC-6 |
| Isolation PLC (operative part) | No |
| Resistance to fast transients | 2 kV level 3 IEC 61000-4-4 |
| Resistance to radiated fields | 9.1 V/m (10 V/m) 26000000...1000000000 Hz)IEC 61000-4-3 level 3 |
| Switchable inductive energy l (R) | <= 400(U.I) ms |
| Maximum circuit breaker threshold | 0.75 A |
| Ambient air temperature for storage | -40...176 °F (-40...80 °C) IEC 61131-2 |
| Ambient air temperature for operation | 23...140 °F (-5...60 °C) IEC 61131-2 |
MPN
ABE7S16S1B2