Skip to main content
AO Ctrl
Log in
Schneider Electric ATS48D47YS338 — Unclassified

Schneider ATS48D47YS338 Altistart 48 Soft Starter, 11 kW, 690 V

MPNATS48D47YS338
Obsolete

Schneider ATS48D47YS338 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$2,705.00Ref. price · indicative, final on quote
Schneider Electric ATS48D47YS338 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

ATS48D47YS338 — Specifications
ParameterValue
MarkingCE
StandardsIEC 60947-4-2
Motor power10 hp at 208 V for severe applications 15 hp at 230 V for standard applications 25 hp at 460 V for severe applications 30 hp at 460 V for standard applications 30 hp at 575 V for severe applications 40 hp at 575 V for standard applications
Protection typePhase failure: line Thermal protection: motor Thermal protection: starter
Range of productAltistart 48
Device connectionIn the motor supply line
Device short nameATS48
Discrete input typePTC, 750 Ohm at 25 °C (Stop, Run, LI3, LI4) logic, 1000...2000 m with current derating of 2.2 % per additional 100 m
Product destinationAsynchronous motors
Utilisation categoryAC-53A
Discrete input number5
Power supply frequency50...60 Hz - 5...5 %
Ue power supply voltage208...690 V - 15...10 %
Product or component typeSoft starter
Product specific applicationHeavy duty industry and pumps

Product details

Overview

The ATS48D47YS338 is a Schneider Altistart 48 soft starter for asynchronous motors, rated at 11 kW and 690 V AC supply. The unit integrates Modbus communication over an RS-485 multidrop interface via a single RJ45 connector.

This soft starter controls motor acceleration and deceleration by ramping voltage, reducing inrush current and mechanical stress. It offers five discrete inputs (Stop, Run, LI3, LI4) with positive logic — state 0 below 5 V and 2 mA, state 1 above 11 V and 5 mA — plus a PTC input for motor thermal protection (750 Ω at 25 °C, trip at 4300 Ω). Two discrete logic outputs (LO1, LO2) and three relay outputs (fault, end-of-starting, motor powered) provide status feedback. The Modbus port supports baud rates of 4800, 9600, or 19200 bps, suiting integration with PLCs and SCADA systems.

Applications

Designed for heavy-duty industrial applications and pump control, the ATS48D47YS338 handles asynchronous motors in conveyors, compressors, fans, and centrifugal pumps. Its thermal protection and phase-failure detection make it suitable for continuous-process environments where motor reliability is critical.

MPN
ATS48D47YS338