BOM / RFQ

Schneider ATV212WU15N4 Altivar 212 HVAC drive, 1.5 kW, 2 HP, IP55

MPNATV212WU15N4

Active

Schneider ATV212WU15N4 Motor Drives — now discontinued, supplied from remaining surplus and broker stock.

$452.12 – $968.81Ref. price · indicative, final on quote

Request quote

Schneider Electric ATV212WU15N4 datasheet (PDF)

StockContact for availability

MOQ1 pcs

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

How we verify every order →

Specifications

ATV212WU15N4 key specifications
Parameter	Value
Connector type	1 open style 1 RJ45
Protection type	Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor
Range of product	Altivar 212
Analogue input type	VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bits
Type of polarization	No impedance
Product or component type	Variable speed drive
Output voltage	= 1 mOhm 500 V DC for 1 minute
Supply voltage limits	323...528 V
Supply voltage	380...480 V - 15...10 %
Line current	2.5 A 480 V 3.2 A 380 V
Continuous output current	3.7 A 380 V 3.7 A 460 V
Maximum transient current	4 A 60 s

All specifications

ATV212WU15N4 additional specifications
Parameter	Value
Apparent power	2.8 kVA 380 V
Motor power	1.5 kW
Maximum horse power rating	2 hp
Supply frequency	50...60 Hz - 5...5 %
Network frequency	47.5...63 Hz
Switching frequency	6...16 kHz adjustable 12...16 kHz with derating factor
Frequency resolution	Display unit 0.1 Hz Analog input 0.024/50 Hz
Nominal switching frequency	12 kHz
Speed drive output frequency	0.5...200 Hz
Phases	3 phase
IP degree of protection	IP55 IEC 61800-5-1 IP55 IEC 60529
Physical interface	2-wire RS 485
Communication service	Monitoring inhibitable Read holding registers (03) 2 words maximum Read device identification (43) Write multiple registers (16) 2 words maximum Time out setting from 0.1 to 100 s Write single register (06)
Communication port protocol	METASYS N2 APOGEE FLN Modbus BACnet LonWorks
EMC filter	Class C2 EMC filter integrated
Pollution degree	2 IEC 61800-5-1
Shock resistance	15 gn 11 ms IEC 60068-2-27
Relative humidity	5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3
Operating altitude	3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating
Vibration resistance	1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8
Depth	7.6 in (192 mm)
Width	8.5 in (215 mm)
Height	11.7 in (297 mm)
Standards	IEC 61800-5-1 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C1 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C3 CE UL CSA C-Tick N1831 GOST
Marking	CE
Category	US1CP4D22157
Data format	8 bits, 1 stop, odd even or no configurable parity
Noise level	48 dB 86/188/EEC
Option card	Communication card LonWorks
Speed range	1...10
Functionality	Mid
Assembly style	With heat sink
Speed accuracy	+/- 10 % of nominal slip 0.2 Tn to Tn
Regulation loop	Adjustable PI regulator
Torque accuracy	+/- 15 %
Local signalling	1 LED (red) for DC bus energized
Device short name	ATV212
Transmission rate	9600 bps or 19200 bps
Operating position	Vertical +/- 10 degree
Transmission frame	RTU
Number of addresses	1...247
Product destination	Asynchronous motors
Prospective line isc	5 kA
Specific application	HVAC
Transient overtorque	120 % of nominal motor torque +/- 10 % 60 s
Analogue input number	2
Braking to standstill	By DC injection
Analogue output number	1
Discrete output number	2
Motor slip compensation	Adjustable Not available in voltage/frequency ratio motor control Automatic whatever the load
Environmental characteristic	Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3
Product specific application	Pumps and fans in HVAC
Electromagnetic compatibility	Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Asynchronous motor control profile	Voltage/frequency ratio, 5 points Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor, standard Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio, 2 points
Acceleration and deceleration ramps	Linear adjustable separately from 0.01 to 3200 s Automatic based on the load
Ambient air temperature for storage	-13...158 °F (-25...70 °C)
Ambient air temperature for operation	14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)

Product details

Overview

The ATV212WU15N4 is a Schneider Altivar 212 HVAC drive rated 1.5 kW / 2 HP, drawing 3.2 A input and delivering 3.7 A output to the motor. It carries an IP55 enclosure with an integrated Class C2 EMC filter, so it can sit in a washdown zone without an external filter box. It speaks Modbus, BACnet, LonWorks, Metasys N2, and APOGEE FLN natively — no option card needed for building management system integration. The drive is CE, UL, CSA, and C-Tick listed per IEC 61800-5-1 and IEC 61800-3 environments 1 and 2 categories C1 through C3.