Skip to main content
Schneider Electric ATV212WU15N4C

Schneider Electric ATV212WU15N4C

MPNATV212WU15N4C
Active

Square D ATV212WU15N4C 2Hp Drive|Square D ATV212WU15N4C 2Hp Drive

$1,355.00Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

ATV212WU15N4C key specifications
ParameterValue
Connector type1 RJ45 1 open style
Protection typeOverheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor
Range of productAltivar 212
Analogue input typeVIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bits
Type of polarizationNo impedance
Product or component typeVariable speed drive
Output voltage= 1 mOhm 500 V DC for 1 minute
Supply voltage limits323...528 V
Supply voltage380...480 V - 15...10 %
Line current3.2 A 380 V 2.6 A 480 V
Continuous output current3.7 A 380 V 3.7 A 460 V
Maximum transient current4 A 60 s

All specifications

ATV212WU15N4C additional specifications
ParameterValue
Apparent power2.8 kVA 380 V
Motor power1.5 kW
Maximum horse power rating2 hp
Supply frequency50...60 Hz - 5...5 %
Network frequency47.5...63 Hz
Switching frequency6...16 kHz adjustable 12...16 kHz with derating factor
Frequency resolutionDisplay unit 0.1 Hz Analog input 0.024/50 Hz
Nominal switching frequency12 kHz
Speed drive output frequency0.5...200 Hz
Phases3 phase
IP degree of protectionIP55 IEC 61800-5-1 IP55 IEC 60529
Physical interface2-wire RS 485
Communication serviceRead holding registers (03) 2 words maximum Monitoring inhibitable Write multiple registers (16) 2 words maximum Write single register (06) Read device identification (43) Time out setting from 0.1 to 100 s
Communication port protocolLonWorks APOGEE FLN Modbus BACnet METASYS N2
EMC filterClass C1 EMC filter integrated
Pollution degree2 IEC 61800-5-1
Shock resistance15 gn 11 ms IEC 60068-2-27
Relative humidity5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3
Operating altitude3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating
Vibration resistance1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8
Depth7.6 in (192 mm)
Width8.5 in (215 mm)
Height11.7 in (297 mm)
StandardsIEC 61800-3 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C1 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 1 category C1 IEC 61800-5-1 EN 61800-3 category C1 IEC 61800-3 environments 1 category C1 IEC 61800-3 EN 55011 group 1 class B IEC 61800-3 environments 2 category C1 IEC 61800-5-1 IEC 61800-3 category C1 IEC 61800-3 environments 2 category C3 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C3
MarkingCE
CategoryUS1CP4D22157
Data format8 bits, 1 stop, odd even or no configurable parity
Noise level48 dB 86/188/EEC
Option cardCommunication card LonWorks
Speed range1...10
Assembly styleWith heat sink
Speed accuracy+/- 10 % of nominal slip 0.2 Tn to Tn
Regulation loopAdjustable PI regulator
Torque accuracy+/- 15 %
Local signalling1 LED (red) for DC bus energized
Device short nameATV212
Transmission rate9600 bps or 19200 bps
Operating positionVertical +/- 10 degree
Transmission frameRTU
Number of addresses1...247
Product destinationAsynchronous motors
Prospective line isc5 kA
Specific applicationHVAC
Transient overtorque120 % of nominal motor torque +/- 10 % 60 s
Analogue input number2
Braking to standstillBy DC injection
Analogue output number1
Discrete output number2
Motor slip compensationAutomatic whatever the load Adjustable Not available in voltage/frequency ratio motor control
Environmental characteristicClasses 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3
Product specific applicationPumps and fans in HVAC
Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Asynchronous motor control profileVoltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio, 2 points Voltage/frequency ratio, 5 points Flux vector control without sensor, standard
Acceleration and deceleration rampsAutomatic based on the load Linear adjustable separately from 0.01 to 3200 s
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)
MPN
ATV212WU15N4C