Schneider Electric ATV930C13N4
MPNATV930C13N4
Active
variable speed drive, Altivar Process ATV900, ATV930, 132kW, 380 to 480V, with braking unit, IP20
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →Specifications
| Parameter | Value |
|---|---|
| Connector type | 2 RJ45 1 RJ45 |
| Protection type | Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive |
| Range of product | Altivar Process ATV900 |
| Relay output type | Configurable relay logic R1 fault relay NO/NC 100000 cycles Configurable relay logic R2 sequence relay NO 1000000 cycles Configurable relay logic R3 sequence relay NO 1000000 cycles |
| Type of polarization | No impedance |
| Product or component type | Variable speed drive |
| Maximum output voltage | 480.0 V |
| Supply voltage | 380...480 V |
| Relative symmetric mains voltage tolerance | 10 % |
| Line current | 237.0 A 380 V normal duty) 201.0 A 380 V heavy duty) 213.0 A 480 V normal duty) 165.0 A 480 V heavy duty) |
| Nominal output current | 250.0 A |
| Continuous output current | 250 A 4 kHz normal duty 211 A 4 kHz heavy duty |
All specifications
| Parameter | Value |
|---|---|
| Maximum transient current | 300 A 60 s normal duty) 317 A 60 s heavy duty) |
| Maximum input current per phase | 237.0 A |
| Base load current at low overload | 250.0 A |
| Base load current at high overload | 211.0 A |
| Apparent power | 161.4 kVA 380...480 V normal duty) 121.8 kVA 380...480 V heavy duty) |
| Motor power | 132.0 kW normal duty 110.0 kW heavy duty |
| Network frequency | 50-60 Hz |
| Switching frequency | 1...8 kHz adjustable 2.5...8 kHz with derating factor |
| Maximum output frequency | 599 Hz |
| Nominal switching frequency | 2.5 kHz |
| Relative symmetric network frequency tolerance | 5 % |
| Phases | 3 phase Single phase |
| IP rating | UL type 1 |
| IP degree of protection | IP21 |
| Physical interface | Ethernet 2-wire RS 485 |
| Communication port protocol | Ethernet IP/Modbus TCP Modbus |
| Mounting mode | Wall mount |
| Electrical connection | Line side screw terminal 2 x 70...3 x 120 mm² 2 x AWG 2/0...2 x 300 kcmil DC bus screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 |
| EMC filter | Integrated With EMC plate option |
| Pollution degree | 2 |
| Shock resistance | 6 gn 11 ms IEC 60068-2-27 |
| Relative humidity | 5...95 % without condensation IEC 60068-2-3 |
| Vibration resistance | 1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6 |
| Permitted relative humidity (during operation) | Class 3K5 according to EN 60721-3 |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Depth | 15.5 in (393 mm) |
| Width | 12.6 in (320 mm) |
| Height | 47.4 in (1205 mm) |
| Standards | UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 |
| Marking | CE |
| Variant | Standard version With braking chopper |
| Category | US1CP4E22277 |
| Isolation | Between power and control terminals |
| Data format | 8 bits, configurable odd, even or no parity |
| Noise level | 69.9 dB |
| Maximum THDI | <48 % full load IEC 61000-3-12 |
| Option module | Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module |
| Assembly style | Enclosed |
| Regulation loop | Adjustable PID regulator |
| Local signalling | Local diagnostic: 3 LEDs (mono/dual colour) 5 LEDs (dual colour) 2 LEDs (dual colour) 1 LED (red) |
| Method of access | Slave Modbus TCP |
| Quantity per set | 1 |
| Transmission rate | 10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s |
| Device application | Industrial Application |
| Operating position | Vertical +/- 10 degree |
| Transmission frame | RTU |
| Number of addresses | 1...247 |
| Product destination | Synchronous motors Asynchronous motors |
| Overvoltage category | III |
| Prospective line isc | 50 kA |
| Braking to standstill | By DC injection |
| Discrete input number | 10 |
| Insulation resistance | > 1 MOhm 500 V DC for 1 minute to earth |
| Motor slip compensation | Adjustable Automatic whatever the load Can be suppressed Not available in permanent magnet motor law |
| Brake chopper integrated | True |
| Environmental characteristic | Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3 |
| Product specific application | Process for industrial |
| 4 quadrant operation possible | True |
| Electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 |
| With sft fct safe stop 2 (SS2) | False |
| Ambient air transport temperature | -13...158 °F (-25...70 °C) |
| Synchronous motor control profile | Permanent magnet motor Synchronous reluctance motor |
| Asynchronous motor control profile | Constant torque standard Variable torque standard Optimized torque mode |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.01...9999 s S, U or customized |
| Ambient air temperature for storage | -13...158 °F (-25...70 °C) |
| Ambient air temperature for operation | 5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor) |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3 |
| With safety function safe stop 1 (SS1) | True |
| With safety function safe position | False |
| With safety function safe direction | False |
| With safety function safe torque off | True |
| With safety function safe programmable logic | False |
| With safety function safe speed monitor | False |
| With safety function safe operating stop | False |
| With safety function safely limited speed | True |
| With safety function safely limited position | False |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2...13 Hz |
MPN
ATV930C13N4