Skip to main content
Log in
Schneider Electric ATV950U07N4EU

Schneider ATV950U07N4EU ATV950 drive, 0.75 kW, 480 V, IP55

MPNATV950U07N4EU
Obsolete

Schneider ATV950U07N4EU — now discontinued, supplied from remaining surplus and broker stock.

$1,695.00 – $2,951.01Ref. price · indicative, final on quote
Schneider Electric ATV950U07N4EU datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

ATV950U07N4EU key specifications
ParameterValue
Range of productAltivar Process ATV900
Type of polarizationNo impedance
Product or component typeVariable speed drive
Supply voltage380...480 V
Relative symmetric mains voltage tolerance10 %
Nominal output current2.2 A
Continuous output current2.2 A 4 kHz normal duty 1.5 A 4 kHz heavy duty
Motor power0.75 kW normal duty 0.37 kW heavy duty
Relative symmetric network frequency tolerance5 %
Phases3 phase
IP ratingUL type 12
IP degree of protectionIP55

All specifications

ATV950U07N4EU additional specifications
ParameterValue
Communication port protocolModbus TCP EtherNet/IP Modbus serial
Mounting modeWall mount
Electrical connectionControl screw terminal 0.5...1.5 mm² Line side screw terminal 4...6 mm² Motor screw terminal 4...6 mm² DC bus screw terminal 2.5...6 mm²
EMC filterIntegrated With EMC plate option
Pollution degree2
Shock resistance15 gn 11 ms IEC 60068-2-27
Relative humidity5...95 % without condensation IEC 60068-2-3
Operating altitude1000...4800 m with current derating 1 % per 100 m
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
Permitted relative humidity (during operation)Class 3K5 according to EN 60721-3
Maximum acceleration under shock impact (during operation)150 m/s² at 11 ms
Maximum acceleration under vibrational stress (during operation)10 m/s² at 13...200 Hz
StandardsUL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
SupplyExternal supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth
MarkingCE
VariantWith load break switch With braking chopper
CategoryUS1CP4E22276
Data format8 bits, configurable odd, even or no parity
Noise level52 dB
Maximum THDI<48 % full load IEC 61000-3-12
Exchange modeHalf duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Option moduleSlot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink
Assembly styleEnclosed
Regulation loopAdjustable PID regulator
Transmission rate10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s
Device applicationIndustrial Application
Operating positionVertical +/- 10 degree
Number of addresses1...247
Product destinationAsynchronous motors Synchronous motors
Overvoltage categoryIII
Environmental characteristicChemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3
Product specific applicationProcess for industrial
Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Ambient air transport temperature-40...158 °F (-40...70 °C)
Ambient air temperature for storage-40...158 °F (-40...70 °C)
Ambient air temperature for operation5...104 °F (-15...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3
Maximum deflection under vibratory load (during operation)1.5 mm at 2...13 Hz

Product details

Overview

The ATV950U07N4EU is a Schneider ATV950 compact enclosed drive rated 0.75 kW normal duty and 0.37 kW heavy duty, delivering 2.2 A at 4 kHz switching frequency from a 480 V AC three-phase supply. It carries IP55 protection and ships with an integrated load break switch and braking chopper, reducing external component count. Communication is handled via dual RJ45 ports supporting Modbus TCP and EtherNet/IP with half/full duplex and autonegotiation, plus a Modbus serial port. Option slots accept Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen, or Ethernet Powerlink modules.

The 2.2 A normal-duty rating at 4 kHz matches a 0.75 kW induction motor on 480 V; dropping to 1.5 A heavy-duty covers 0.37 kW for constant-torque loads. The drive supports both constant and variable torque profiles, so it handles pump/fan duty as well as conveyor or light hoist applications. Compared to the ATV340U30N4, which offers 2 analog inputs and 5 discrete inputs, the ATV950U07N4EU provides 3 analog inputs and 10 digital inputs, giving more I/O headroom for multi-sensor feedback without an expansion module.

MPN
ATV950U07N4EU