Skip to main content
Log in
Schneider Electric ATV950U30N4EU

Schneider ATV950U30N4EU Altivar 950 drive, 3 kW normal duty, IP55

MPNATV950U30N4EU
Active

Schneider ATV950U30N4EU — now discontinued, supplied from remaining surplus and broker stock.

$2,265.00 – $3,651.72Ref. price · indicative, final on quote
Schneider Electric ATV950U30N4EU datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

ATV950U30N4EU key specifications
ParameterValue
Range of productAltivar Process ATV900
Type of polarizationNo impedance
Product or component typeVariable speed drive
Supply voltage380...480 V
Relative symmetric mains voltage tolerance10 %
Nominal output current7.2 A
Continuous output current7.2 A 4 kHz normal duty 5.6 A 4 kHz heavy duty
Motor power3.0 kW normal duty 2.2 kW heavy duty
Relative symmetric network frequency tolerance5 %
Phases3 phase
IP ratingUL type 12
IP degree of protectionIP55

All specifications

ATV950U30N4EU additional specifications
ParameterValue
Communication port protocolModbus TCP Modbus serial EtherNet/IP
Mounting modeWall mount
Electrical connectionControl screw terminal 0.5...1.5 mm² Line side screw terminal 4...6 mm² Motor screw terminal 4...6 mm² DC bus screw terminal 2.5...6 mm²
EMC filterIntegrated With EMC plate option
Pollution degree2
Shock resistance15 gn 11 ms IEC 60068-2-27
Relative humidity5...95 % without condensation IEC 60068-2-3
Operating altitude1000...4800 m with current derating 1 % per 100 m
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
Permitted relative humidity (during operation)Class 3K5 according to EN 60721-3
Maximum acceleration under shock impact (during operation)150 m/s² at 11 ms
Maximum acceleration under vibrational stress (during operation)10 m/s² at 13...200 Hz
StandardsUL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
SupplyExternal supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth
MarkingCE
VariantWith braking chopper With load break switch
CategoryUS1CP4E22276
Data format8 bits, configurable odd, even or no parity
Noise level52 dB
Maximum THDI<48 % full load IEC 61000-3-12
Exchange modeHalf duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Option moduleSlot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink
Assembly styleEnclosed
Regulation loopAdjustable PID regulator
Transmission rate10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s
Device applicationIndustrial Application
Operating positionVertical +/- 10 degree
Number of addresses1...247
Product destinationAsynchronous motors Synchronous motors
Overvoltage categoryIII
Environmental characteristicChemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3
Product specific applicationProcess for industrial
Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Ambient air transport temperature-40...158 °F (-40...70 °C)
Ambient air temperature for storage-40...158 °F (-40...70 °C)
Ambient air temperature for operation5...104 °F (-15...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3
Maximum deflection under vibratory load (during operation)1.5 mm at 2...13 Hz

Product details

Overview

The ATV950U30N4EU is a Schneider Altivar 950 compact enclosed drive rated 3.0 kW normal duty / 2.2 kW heavy duty, delivering 7.2 A / 5.6 A at 4 kHz from a 480 V AC three-phase supply. It ships with an integrated EMC filter, a braking chopper, and a load break switch, sealed to IP55 for washdown or dusty environments. Communication is handled via dual RJ45 ports supporting Modbus TCP, EtherNet/IP, and Modbus serial, with three option slots for Profibus, PROFINET, DeviceNet, EtherCAT, CANopen, or encoder feedback modules.

Compared to the ATV340U30N4, the ATV950U30N4EU offers a higher I/O count — 10 digital and 3 analog inputs versus 5 discrete and 2 analog on the ATV340 — and adds an integrated load break switch and IP55 enclosure, making it a more self-contained option for standalone installations.

MPN
ATV950U30N4EU