Skip to main content
Log in
Schneider Electric ATV950U75N4E

Schneider ATV950U75N4E Altivar Process Drive, 7.5 kW

MPNATV950U75N4E
Active

Schneider Altivar Process ATV950U75N4E, 7.5 kW variable speed drive, 380-480V, 16.5 A, IP55, with braking chopper.

$2,839.20Ref. price · indicative, final on quote
Schneider Electric ATV950U75N4E datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

ATV950U75N4E key specifications
ParameterValue
Range of productAltivar Process ATV900
Type of polarizationNo impedance
Product or component typeVariable speed drive
Supply voltage380...480 V
Relative symmetric mains voltage tolerance10 %
Nominal output current16.5 A
Continuous output current16.5 A at 4 kHz for normal duty 12.7 A at 4 kHz for heavy duty
Motor power7.5 kW for normal duty 5.5 kW for heavy duty
Relative symmetric network frequency tolerance5 %
Network number of phases3 phases
IP ratingUL type 1
IP degree of protectionIP55

All specifications

ATV950U75N4E additional specifications
ParameterValue
Communication port protocolModbus TCP Modbus serial EtherNet/IP
Mounting modeWall mount
Electrical connectionControl: screw terminal 0.5...1.5 mm² Motor: screw terminal 6...10 mm² Line side: screw terminal 4...6 mm² DC bus: screw terminal 4...10 mm²
EMC filterIntegrated With EMC plate option
Pollution degree2
Shock resistance15 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3
Operating altitude1000...4800 m with current derating 1 % per 100 m
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
Permitted relative humidity (during operation)Class 3K5 according to EN 60721-3
Maximum acceleration under shock impact (during operation)150 m/s² at 11 ms
Maximum acceleration under vibrational stress (during operation)10 m/s² at 13...200 Hz
StandardsUL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
SupplyExternal supply for digital inputs: 24 V DC (19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO: 24 V DC (21...27 V), 1 MOhm 500 V DC for 1 minute to earth
MarkingCE
VariantWith braking chopper With load break switch
Data format8 bits, configurable odd, even or no parity
Noise level52 dB
Maximum THDI<48 % from 80...100 % of load conforming to IEC 61000-3-12
Exchange modeHalf duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Option moduleSlot A: communication module for Profibus DP V1 Slot A: communication module for PROFINET Slot A: communication module for DeviceNet Slot A: communication module for EtherCAT Slot A: communication module for CANopen daisy chain RJ45 Slot A: communication module for CANopen SUB-D 9 Slot A: communication module for CANopen screw terminals Slot A/slot B/slot C: digital and analog I/O extension module Slot A/slot B/slot C: output relay extension module Slot B: 5/12 V digital encoder interface module Slot B: analog encoder interface module Slot B: resolver encoder interface module communication module for Ethernet Powerlink
Assembly styleEnclosed
Regulation loopAdjustable PID regulator
Transmission rate10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s
Device applicationIndustrial application
Operating positionVertical +/- 10 degree
Number of addresses1...247
Product destinationSynchronous motors Asynchronous motors
Overvoltage categoryIII
Environmental characteristicChemical pollution resistance class 3C3 conforming to IEC 60721-3-3 Dust pollution resistance class 3S3 conforming to IEC 60721-3-3
Product specific applicationProcess for industrial
Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Ambient air transport temperature-40...70 °C
Ambient air temperature for storage-40...70 °C
Ambient air temperature for operation-15...40 °C (without derating) 40...50 °C (with derating factor)
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3
Maximum deflection under vibratory load (during operation)1.5 mm at 2...13 Hz

Product details

Integrator’s brief

This ATV950U75N4E is a 7.5 kW drive from the Altivar Process line. IP55 enclosure handles dust and hose-down—ready for floor-mount or wall-mount. Integrated EMC filter and braking chopper save panel space and wiring. Runs both asynchronous and synchronous motors up to 16.5 A at 4 kHz for normal duty, 12.7 A for heavy duty.

Wall-mount only, vertical within +/-10 degrees. Altitude derating: 1% per 100 m above 1000 m. Control supply: 24 V DC for digital inputs, plus internal 24 V for STO. Built-in Modbus TCP, Ethernet/IP, Modbus serial; slot A takes Profibus, PROFINET, DeviceNet, EtherCAT, or CANopen options. Line and motor terminals accept up to 10 mm².

Frequently asked questions

What control power does the ATV950U75N4E need?

Digital inputs require an external 24 V DC supply (19...30 V). There is an internal 24 V (21...27 V) feed for digital inputs and STO, plus a 10.5 V DC supply for a 1 to 10 kOhm reference potentiometer.

What compliance standards does it carry?

CE marking. Standards include UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1.

What is the continuous output current at 4 kHz?

16.5 A for normal duty (7.5 kW motor), 12.7 A for heavy duty (5.5 kW motor).

MPN
ATV950U75N4E