Schneider Electric BCH18LH2033CA6C
MPNBCH18LH2033CA6C
Active
Servo motor BCH18, 2kw, L100, 23bit, OPTO MT
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Encoder type | Optic encoder |
| Feedback type | 23 bits optic multi turn encoder |
| Product or component type | Servo motor |
| Supply voltage | 220 V |
| Maximum current irms | at 2.0 kW, 220 V |
| Continuous stall current | 13.2 A |
| Maximum permanent current | 41.0 A |
| Continuous power | 2000 W |
| Nominal output power | 2000 W, 220 V |
| Number of motor poles | 5.0 |
| IP degree of protection | IP67 |
| Mounting support | Asian standard flange |
All specifications
| Parameter | Value |
|---|---|
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 9 mm |
| Electrical connection | 2 connectors male/female |
| Depth | 152.2 mm |
| Width | 174.0 mm |
| Height | 100.0 mm |
| Key width | 8.0 mm |
| Length | 174 mm |
| Inertia | 0.0 kg.cm² of brake 2.64 kg.cm² of motor |
| Shaft end | Parallel key |
| Shaft length | 45.0 mm |
| Holding brake | Without |
| Nominal speed | 3000 rpm, 220 V |
| Rotor inertia | 2.64 kg.cm² |
| Nominal torque | 6.37 N.m, 220 V |
| Shaft diameter | 22.0 mm |
| Device short name | BCH18 |
| Motor flange size | 100 mm |
| Peak stall torque | 19.1 N.m, 220 V |
| Stator inductance | 1.97 mH |
| Stator resistance | 0.23 Ohm |
| Maximum axial force fa | 196 N |
| Continuous stall torque | 6.37 N.m, 220 V |
| Maximum radial force fr | 686 N |
| Maximum mechanical speed | 6000.0 rpm |
MPN
BCH18LH2033CA6C