Schneider Electric BCH18MD0133CA5C
MPNBCH18MD0133CA5C
Active
Servo motor BCH18, 100w, M60, 23bit, OPTO MT
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
| Parameter | Value |
|---|---|
| Nominal torque | 0.32 N.m, 220 V |
| Nominal output power | 100 W, 220 V |
| Continuous power | 100 W |
| Nominal speed | 3000 rpm, 220 V |
| Maximum mechanical speed | 6000.0 rpm |
| Continuous stall torque | 0.32 N.m, 220 V |
| Peak stall torque | 0.96 N.m, 220 V |
| Rotor inertia | 0.16 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 220 V |
| Maximum current (Irms) | at 0.1 kW, 220 V |
| Continuous stall current | 1.1 A |
| Maximum permanent current | 3.4 A |
| Number of motor poles | 5.0 |
| Stator resistance | 11.8 Ohm |
| Stator inductance | 27.0 mH |
| Electrical connection | 2 connectors male/female |
| Parameter | Value |
|---|---|
| Encoder type | Optic encoder |
| Feedback type | 23 bits optic multi turn encoder |
| Parameter | Value |
|---|---|
| Shaft end style | Parallel key |
| Shaft diameter | 8.0 mm |
| Shaft length | 25.0 mm |
| Key width | 3.0 mm |
| Motor flange size | 60 mm |
| Mounting support | Asian standard flange |
| Length | 69.2 mm |
| Number of mounting holes | 4 |
| Mounting-hole bolt circle diameter | 5.5 mm |
| Maximum radial force (Fr) | 245 N |
| Maximum axial force (Fa) | 74 N |
| Width | 69.2 mm |
| Height | 60.0 mm |
| Depth | 68.6 mm |
| Parameter | Value |
|---|---|
| IP degree of protection | IP67 |
MPN
BCH18MD0133CA5C