Schneider Electric BCH18MM20232A6C
MPNBCH18MM20232A6C
Active
Servo motor BCH18, Lexium 18, 2.0kW, M130, 23bit, MAG MT
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Encoder type | Optic encoder |
| Feedback type | 23 bits optic incremental encoder |
| Product or component type | Servo motor |
| Supply voltage | 220 V |
| Maximum current irms | at 2.0 kW, 220 V |
| Continuous stall current | 11.7 A |
| Maximum permanent current | 36.0 A |
| Continuous power | 2000 W |
| Nominal output power | 2000 W, 220 V |
| Number of motor poles | 5.0 |
| IP degree of protection | IP67 |
| Mounting support | Asian standard flange |
All specifications
| Parameter | Value |
|---|---|
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 9 mm |
| Electrical connection | 2 connectors male/female |
| Depth | 182.4 mm |
| Width | 195.9 mm |
| Height | 130 mm |
| Key width | 8 mm |
| Length | 195.9 mm |
| Inertia | 0.0 kg.cm² of brake 27.79 kg.cm² of motor |
| Shaft end | Parallel key |
| Shaft length | 55 mm |
| Holding brake | Without |
| Nominal speed | 2000 rpm, 220 V |
| Rotor inertia | 27.79 kg.cm² |
| Nominal torque | 9.55 N.m, 220 V |
| Shaft diameter | 22.0 mm |
| Device short name | BCH18 |
| Motor flange size | 130 mm |
| Peak stall torque | 28.65 N.m, 220 V |
| Stator inductance | 2.85 mH |
| Stator resistance | 0.29 Ohm |
| Maximum axial force fa | 343 N |
| Continuous stall torque | 9.55 N.m, 220 V |
| Maximum radial force fr | 686 N |
| Maximum mechanical speed | 3000.0 rpm |
| Ambient air temperature for operation | 0...40 °C |
MPN
BCH18MM20232A6C