Schneider Electric BCH18MR2413CA6C
MPNBCH18MR2413CA6C
Active
Servo motor BCH18, 2.4kw, M180, 23bit, OPTO MT
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
| Parameter | Value |
|---|---|
| Nominal torque | 15.1 N.m, 220 V |
| Nominal output power | 2400 W, 220 V |
| Continuous power | 2400 W |
| Nominal speed | 1500 rpm, 220 V |
| Maximum mechanical speed | 3000.0 rpm |
| Continuous stall torque | 15.1 N.m, 220 V |
| Peak stall torque | 45.3 N.m, 220 V |
| Rotor inertia | 46.32 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 220 V |
| Maximum current (Irms) | at 2.4 kW, 220 V |
| Continuous stall current | 18.2 A |
| Maximum permanent current | 56.0 A |
| Number of motor poles | 5.0 |
| Stator resistance | 0.113 Ohm |
| Stator inductance | 2.28 mH |
| Electrical connection | 2 connectors male/female |
| Parameter | Value |
|---|---|
| Encoder type | Optic encoder |
| Feedback type | 23 bits optic multi turn encoder |
| Parameter | Value |
|---|---|
| Shaft end style | Parallel key |
| Shaft diameter | 35.0 mm |
| Shaft length | 79.0 mm |
| Key width | 10.0 mm |
| Motor flange size | 180 mm |
| Mounting support | Asian standard flange |
| Length | 193 mm |
| Number of mounting holes | 4 |
| Mounting-hole bolt circle diameter | 13.5 mm |
| Maximum radial force (Fr) | 1470 N |
| Maximum axial force (Fa) | 490 N |
| Width | 193.0 mm |
| Height | 180.0 mm |
| Depth | 231.2 mm |
| Parameter | Value |
|---|---|
| IP degree of protection | IP67 |
MPN
BCH18MR2413CA6C