Schneider Electric BCH2MR5513CF6C
MPNBCH2MR5513CF6C
Obsolete
servo motor BCH2, Lexium, 180mm, 5500W, 120.2kg.cm², with oil seal, with key, brake, straight connection
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Feedback type | 20 bits single turn absolute encoder |
| Type of cooling | Natural convection |
| Range of product | Lexium 26 |
| Product or component type | Servo motor |
| Supply voltage | 220 V |
| Maximum current irms | 74.2 A for LXM28... at 5.5 kW, 220 V 74.2 A for LXM26D at 5.5 kW, 220 V |
| Continuous stall current | 25.05 A |
| Maximum permanent current | 28.8 A |
| Continuous power | 5500 W |
| Brake pull-in power | 49.6 W |
| Nominal output power | 5500 W for LXM28... at 28.8 mA, 220 V, three phase 5500 W for LXM26D at 28.8 mA, 220 V, three phase |
| Network number of phases | 3 |
All specifications
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 IM V3 IP65 IM B5, IM V1 |
| Mounting support | Asian standard flange |
| Mounting holes diameter | 13.5 mm |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 200 mm |
| Electrical connection | Connector MIL |
| Key width | 12 mm |
| Product weight | 36.5 kg |
| Centring collar depth | 4 mm |
| Length | 313 mm |
| Shaft end | Keyed |
| Shaft length | 113 mm |
| Holding brake | With |
| Nominal speed | 1500 rpm for LXM28... at 28.8 mA, 220 V, three phase 1500 rpm for LXM26D at 28.8 mA, 220 V, three phase |
| Rotor inertia | 120.2 kg.cm² |
| Holding torque | 50 N.m built-in |
| Nominal torque | 35.01 N.m for LXM28... at 28.8 mA, 220 V, three phase 35.01 N.m for LXM26D at 28.8 mA, 220 V, three phase |
| Shaft diameter | 42 mm |
| Torque constant | 1.4 N.m/A at 20 °C |
| Sizing reference | BCH2 |
| Back emf constant | 84.5 V/krpm at 20 °C |
| Device short name | BCH2 |
| Motor flange size | 180 mm |
| Peak stall torque | 87 N.m for LXM28... at 28.8 mA, 220 V, three phase 87 N.m for LXM26D at 28.8 mA, 220 V, three phase |
| Stator inductance | 2.25 mH at 20 °C |
| Stator resistance | 0.104 Ohm at 20 °C |
| Temperature magnet rt | 20 °C |
| Maximum axial force fa | 497 N |
| Number of motor stacks | 4 |
| Temperature copper hot | 135 °C |
| Temperature magnet hot | 100 °C |
| Continuous stall torque | 35.01 N.m for LXM28 at 28.8 mA, 220 V, three phase 35.01 N.m for LXM26D at 28.8 mA, 220 V, three phase |
| Maximum radial force fr | 1200 N at 1500 rpm |
| Accuracy error [angular] | 0.044 ° |
| Centring collar diameter | 114.3 mm |
| Maximum mechanical speed | 2600 rpm |
| Distance shaft shoulder-flange | 4 mm |
| Stator electrical time constant | 21.6 ms at 20 °C |
| Ambient air temperature for operation | 0...40 °C |
MPN
BCH2MR5513CF6C