100 W servo with 23-bit absolute feedback
The BEH18LB0133CA5C is a 100 W servo motor from the Lexium 18 range, delivering 0.32 Nm nominal torque at 3000 rpm from a 220 V single-phase supply. The 23-bit optic multi-turn encoder provides 8388608 points per turn of absolute position feedback, eliminating the need for a homing cycle on power-up in multi-axis applications.
IP67 sealed construction for washdown environments
Rated IP67, the motor body and shaft seal withstand direct water spray and temporary immersion — suitable for food processing, beverage filling, or washdown stations where hose-down cleaning is routine. Air-cooled with no external fan, it relies on natural convection and the machine's own airflow. The 40 mm Asian-standard flange mounts with two bolts, and the shaft is an 8 mm diameter parallel key with a 25 mm length and 3.0 mm key width. Maximum radial force at the shaft is 78 N, axial force 54 N — stay within these limits to avoid bearing overload in belt-drive or direct-couple installations.
Active production — sourced through authorized channels
Electrical connection uses two male/female connectors, and the motor has 10 poles. The continuous stall current is 1.05 A, with a maximum permanent current of 3.15 A at the 100 W rating. Peak stall torque reaches 0.96 Nm at 220 V, giving a 3:1 peak-to-continuous torque ratio for short-duration acceleration moves.