1.5 kW continuous power, 4.77 N.m torque at 3000 rpm
The BEH18LH1533CA6C is a 1.5 kW servo motor from Schneider Electric's Lexium 18 series, delivering 4.77 N.m nominal torque at 3000 rpm on a single-phase 220 V supply. This power and torque profile suits it for medium-duty positioning and motion-control applications in packaging, material handling, and general automation where the load requires sustained torque up to that speed. Peak stall torque reaches 14.31 N.m at 220 V, giving the motor headroom for acceleration and short-duration overloads during rapid moves or when overcoming static friction. The continuous stall torque matches the nominal 4.77 N.m, so the motor can hold position at rated torque indefinitely without overheating.
23-bit optical multi-turn encoder and IP67 sealing
Feedback comes from a 23-bit optical multi-turn encoder, providing 8,388,608 counts per revolution and absolute position tracking over multiple turns. This resolution supports precise velocity and position loops in applications like pick-and-place, labeling, and synchronized multi-axis systems where the controller expects high-count feedback. The motor carries an IP67 rating, meaning the housing and shaft seal withstands dust ingress and temporary immersion up to 1 meter for 30 minutes. This makes it suitable for washdown environments in food processing, beverage filling, or any line where hosing down equipment is routine — the connector and cable entry must be properly mated to maintain the seal. Cooling is air-cooled via the motor's external surface; no forced ventilation or liquid cooling is required at the rated duty. The Asian standard flange (100 mm square, 4 mounting holes at 9 mm diameter) matches common mounting patterns for servo motors in machinery built to Asian machine-tool standards.