1.5 kW at 3000 rpm — load-sizing anchor
The BEH18LH1533CF6D delivers 1500 W continuous output power at 3000 rpm nominal speed on a three-phase 380 V supply, with a nominal torque of 4.77 N.m. The continuous stall torque matches the nominal torque at 4.77 N.m, meaning the motor holds rated torque at zero speed without overheating — useful for positioning applications that dwell under load. Peak stall torque reaches 14.31 N.m under the same 380 V three-phase supply, giving a 3:1 overload margin for acceleration and emergency stops.
Holding brake — 8 N.m for vertical loads
The integrated holding brake delivers 8 N.m of holding torque, which locks the rotor when power is removed. This is sized for vertical-axis or gravity-loaded applications where the load must not drift during a power loss or E-stop — typical for pick-and-place gantries, elevators, and Z-axis stages.
23-bit absolute encoder — position retention over multiple turns
The optical multi-turn absolute encoder provides 23 bits of resolution, retaining shaft position across power cycles without requiring a home sequence on startup. This eliminates the homing routine on each power-up in applications where the machine must resume from the last commanded position — common in CNC tool changers and rotary indexing tables. The encoder is optical, not magnetic; optical types offer higher resolution and lower jitter at the cost of sensitivity to contamination. The IP67 rating on the motor body protects the encoder housing from washdown ingress.
IP67 — washdown-ready enclosure
Rated IP67, the motor body and connector interface are sealed against dust and temporary immersion. This suits food-and-beverage lines, car washes, or any area where the motor sees scheduled washdown with hoses or steam. The electrical connection uses two male/female connectors — the IP67 seal depends on the mating connector being properly torqued. The shaft end is a parallel key with 24 mm diameter and 45 mm shaft length, standard for coupling to gearboxes or pulleys.
Active production — no obsolescence signal
No official successor or cross-reference is recorded — this is the current variant in the Lexium 18 range. The Asian standard flange (100 mm mounting holes at 9 mm diameter) matches the common frame size for integration into existing machine designs.